Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

NA2-N12｜General Purpose & Slim Body Area Sensor NA2-N

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

NA2-N12

Part Number

NA2-N12

Product

General Purpose & Slim Body Area Sensor

Details

NPN output

Product Name

 General Purpose & Slim Body Area Sensor NA2-N

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberNA2-N12
Product NumberNA2-N12
Products NameGeneral Purpose & Slim Body Area Sensor
Product detailsNPN output
The price of the productPlease contact our office
Sensing height220 mm 8.661 in
Sensing range5 m 16.404 ft
Beam pitch20 mm 0.787 in
Sensing objectdia. 30 mm dia. 1.181 in or more opaque object (completely beam interrupted objects)
Supply voltage12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Power consumption:Emitter:Job indicator ON0.8 W or less
Power consumption:Emitter:Job indicator OFF0.7 W or less
Power consumption:Receiver:Job indicator ON0.8 W or less
Power consumption:Receiver:Job indicator OFF0.7 W or less
OutputNPN open-collector transistor
- Maximum sink current: 100 mA
- Applied voltage: 30 V DC or less (between output and 0 V)
- Residual voltage: 2 V or less (at 100 mA sink current), 1 V or less (at 16 mA sink current)
Output:Utilization categoryDC-12 or DC-13
Output:Output operationON when all beam channels are received (OFF when one or more beam channels are interrupted)
Output:Short-circuit protectionIncorporated
Response time10 ms or less (12 ms or less when the interference prevention function is used)
Indicators:EmitterEmitting indicator: Green LED x 2 (light up during emission; one LED lights up for Frequency A setting, both LEDs light up for Frequency B setting)
Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch)
Indicators:ReceiverOperation indicator: Red LED (lights up when one or more beam channels are interrupted)
Stable incident beam indicator: Green LED (lights up when all beam channels are stably received)
Job indicator: Red LED (lights up, blinks or lights off when the job indicator input is applied, selected by operation mode switch)
* When an excess current flows through the output, the stable incident beam indicator and the operation indicator on the receiver blink simultaneously due to operation of the short-circuit protection circuit.
Interference prevention functionIncorporated
Test input (emission halt) functionIncorporated
Pollution degree3 (Industrial environment)
ProtectionIP40(IEC)
Ambient temperature-10 to +55 degrees +14 to +131 degrees Fahrenheit (No dew condensation or icing allowed), Storage: -10 to +60 degrees +14 to +140 degrees Fahrenheit
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Ambient illuminanceIncandescent light: 3,000 lx or less at the light-receiving face
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
Emitting elementInfrared LED (Peak emission wavelength: 870 nm 0.034 mil, modulated) (Note：Peak emission wavelength has been changed from production in March, 2017.)
MaterialEnclosure: Heat-resistant ABS
Lens cover: Polyester
Indicator cover: Acrylic
Cable0.2 mm2 4-core cabtyre cable, 3 m 9.843 ft long
Cable extensionExtension up to total 25 m 82.021 ft is possible for both emitter and receiver, with 0.2 mm2, or more, cable.
Weight(Total weight of emitter and receiver)Net weight: 400 g approx.
Gross weight: 600 g approx.

MENU

Recently checked products

Recently checked product numbers