Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

GP-XC3SE-P｜High Speed・High Accuracy Eddy Current Type Digital Displacement Sensor GP-X

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

GP-XC3SE-P

Part Number

GP-XC3SE-P

Product

High Speed High Accuracy Eddy Current Type Digital Displacement Sensor

Details

Non-threaded type sensor head + Controller

Product Name

 High Speed・High Accuracy Eddy Current Type Digital Displacement Sensor GP-X

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberGP-XC3SE-P
Product NumberGP-XC3SE-P
Products NameHigh Speed High Accuracy Eddy Current Type Digital Displacement Sensor
Product detailsNon-threaded type sensor head + Controller
The price of the productPlease contact our office

Controllers

ItemSpecifications
TypePNP output
Supply voltage24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption150 mA or less
Resolution0.04 % F.S. (64 times average processing)
(Note) This value was obtained at a constant +25 ℃ +77 ℉ .
Sampling frequency40 kHz (25 micro s)
LinearityWithin plus or minus 0.3 % F.S.
(Note) This value was obtained at a constant +25 ℃ +77 ℉ .
Temperature characteristics0.07 % F.S./℃ or less
(Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and controller.
Analog voltage outputsOutput voltage: -5 to +5 V (Note1) , Output impedance: 100 Ω approx.(Note2)
(Note1： Adjusted to a 0 to +5 V factory setting.)
(Note2：When using the BCD output unit GP-XBCD, the analog voltage output of a controller becomes invalid.)
Analog voltage outputs : Response time75 micro s (maximum speed)
Comparative outputs (HI, GO, LO)PNP open-collector transistor
-Maximum source current: 100 mA
-Applied voltage: 30 V DC or less
(between comparative output and +V)
-Residual voltage: 1.6 V or less (at 100 mA source current), 0.4 V or less (at 16 mA source current)
Comparative outputs (HI, GO, LO) : Utilization categoryDC-12 or DC-13
Comparative outputs (HI, GO, LO) : Output numberHI / GO / LO 3 value output
Comparative outputs (HI, GO, LO) : Output operationHI: ON when measured value > the upper limit value
GO: ON when upper limit value >= measured value >= lower limit value
LO: ON when lower limit value > measured value
Comparative outputs (HI, GO, LO) : Short-circuit protectionIncorporated
External inputPhoto-coupler input
- Input current: 9 mA or less
- Operating voltage: ON voltage 17 V or more (between 0 V and input), OFF voltage 4 V or less (between 0 V and input)
- Input impedance: 5 kΩ approx.
Serial I/ORS-232C
Zero-set setting methodPush button setting / External input setting
Indicators : MODEOrange LED (lights up when in mode status)
Indicators : HIOrange LED (lights up when the upper limit value is exceeded)
Indicators : GOGreen LED (lights up when within the upper and lower limit value)
Indicators : LOOrange LED (lights up when less than the lower limit value)
Indicators : TIMINGGreen LED (lights up as per the external or internal trigger timing)
Upper level digital display part5 digit orange LED (display of numerical values out of upper and lower limit value)
Lower level digital display part5 digit green LED (display of numerical values within the upper and lower limit value)
Pollution degree3 (Industrial environment)
Ambient temperature0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage: 0 to +50 ℃ +32 to +122 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Vibration resistance10 to 55 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Shock resistance100 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each
MaterialEnclosure: Polycarbonate
WeightNet weight: 120 g approx.
AccessoryATA4811 (Controller mounting frame): 1 set

Sensor heads

ItemSpecifications
TypeNon-threaded type For 0.8 mm 0.031 in sensing
Sensing range0 to 0.8 mm 0 to 0.031 in
(Note) The sensing range is specified for the standard sensing object.
Standard sensing objectStainless steel (SUS304) / Iron sheet [Cold rolled carbon steel (SPCC)] 60 x 60 x t 1 mm 2.362 x 2.362 x t 0.039 in
Temperature characteristics0.07 % F.S./℃ or less
(Note) This value represents 20 to 60 % of the maximum sensing distance when combining the sensor head and the controller.
Pollution degree3 (Industrial environment)
ProtectionIP67 (IEC), IP67g (Note：If using the sensor in an environment where cutting oil droplets splatter, the sensor may be deteriorated due to added substances in the oil. Please check the resistivity of the sensor against the cutting oil you are using beforehand.)
Ambient temperature-10 to +55 ℃ +14 to +131 ℉ , Storage: -20 to +70 ℃ -4 to +158 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Voltage withstandability250 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.030 in amplitude in X, Y and Z directions for two hours each
Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions five times each
EnclosureStainless steel (SUS303)
Cable protector-
Sensing partABS
CableHigh frequency coaxial cable with connector, 3 m 9.843 ft long
(Note) For the flexible cable type, please contact our office.
Cable extensionExtension up to total 10 m 32.808 ft is possible with the optional cable.
Net Weight40 g approx.
(Note) The given weight of the threaded type sensor head is the value including the weight of the nuts and the toothed lock washer.
Accessories-

MENU

Recently checked products

Recently checked product numbers