------------------------------ Tab1 showing ------------------------------
Discontinued Products
------------------------------ Tab2 showing ------------------------------
Specifications
RATING
Lead wire type, Standard speed ASEP80211
| Rated voltage (V) | Frequency (Hz) | Input power (W) max/AVE | Rated current (mA) max/AVE | Locked current (mA) max/AVE | Rotation speed (min-1) min/AVE | Max. air flow (m3/min) min/AVE | Max. static pressure (Pa) min/AVE | Noise (dB) max/AVE | Operating voltage range (V) (%) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|
| 100 | 50 | 8.8/8.0 | 130/110 | 150/120 | 2,500/2,700 | 0.52/0.57 | 34.0/39.0 | 29.0/24.0 (34.0/29.0) | ±10 | 0.24 |
| 60 | 7.15/6.5 | 110/90 | 140/110 | 3,000/3,200 | 0.63/0.68 | 48.0/55.0 | 36.0/31.0 (41.0/36.0) |
Note: 1 Values above without designations are averages.
Note: 2 Noise levels are based on measurements taken at a distance of 1 m from the front of the fan.
Lead wire type, Standard speed ASEP80212
| Rated voltage (V) | Frequency (Hz) | Input power (W) max/AVE | Rated current (mA) max/AVE | Locked current (mA) max/AVE | Rotation speed (min-1) min/AVE | Max. air flow (m3/min) min/AVE | Max. static pressure (Pa) min/AVE | Noise (dB) max/AVE | Operating voltage range (V) (%) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|---|---|
| 115 | 50 | 8.8/8.0 | 110/93 | 130/100 | 2,500/2,700 | 0.52/0.57 | 34.0/39.0 | 29.0/24.0 (34.0/29.0) | ±10 | 0.24 |
| 60 | 7.15/6.5 | 90/77 | 120/90 | 3,000/3,200 | 0.63/0.68 | 48.0/55.0 | 36.0/31.0 (41.0/36.0) |
Note: 1 Values above without designations are averages.
Note: 2 Noise levels are based on measurements taken at a distance of 1 m from the front of the fan.
SPECIFICATIONS
| Ambient temperature | -10℃ to +60℃ +14℉ to +140℉ | |
|---|---|---|
| Ambient humidity | 15 to 85%RH | |
| Storage temperature | -20℃ to +70℃ -4℉ to +158℉ | |
| Breakdown voltage | 1,500 V AC for 1 min. (between charging section and frame) | |
| Insulation resistance | Min. 100MΩ (at 500 V DC megger) (between charging section and frame) | |
| Insulation class | UL:A class | |
| Vibration resistance | Frequency | 10 to 55Hz |
| Double amplitude width | 0.75mm | |
| Applied direction | X, Y and Z directions | |
| Applied time | 10 min. in each direction | |
| Protection | Impedance protected | |
| Mean life | 100,000 hours at 25 ℃ (Life time when continuously energized by applying the rated voltage Current value: + 15% or more Rotation speed: -15% or less) | |
DATA (Airflow - Static pressure Characteristic Curve)
MATERIALS USED
| Frame | aluminum alloy die-casting |
|---|---|
| Propeller | plastic |
| Bearings | ball bearings |
| Lead wires | UL3266 and AWG22 |
| Label | 100 V class...black base |
------------------------------ Tab3 showing ------------------------------
Dimensions
- Unit: mm in
ASEP8
Mounting Hole Dimensions
------------------------------ Tab4 showing ------------------------------
Cautions For Use
AC fan motor
- As a guide, use a Faston terminal mounting pressure of Max. 49 N.
DC fan motor and AC fan motor
- Since our fan motor employs precision ball bearings, due care should be taken not to apply any shock in handling.
- Due to the bearing mechanism, the noise level will increase in proportion to the length of time the fan is used.
Avoid use where the temperature is high or where there is a lot of dirt. - Do not allow substances such as oil and grease to get onto the plastic part of the fan body. Some oils and greases decompose and become altered at high temperatures. These can have an adverse effect if they contact the fan.
Therefore, be very careful when handling these substances. - Do not apply unnecessary force to the internal parts when handling the product. Also, do not use a fan that has been dropped.
- Installation
Install according to the diagrams below.
- Regarding the life of the fan, the ambient temperature is room temperature. The life of the fan varies depending on the operating frequency, usage time, surrounding atmosphere, etc., so please check with the actual conditions.
- Transport and storage conditions
The allowable specifications for environments suitable for transportation and storage are given below.
・No freezing between -20 ℃ to 0 ℃ -4 ℉ to +32 ℉
・No condensation in the range above between 0 ℃ to +70 ℃ +32 ℉ to +158 ℉ - Condensation
If the temperature is high and there is a lot of humidity, condensation will occur when the temperature suddenly changes.
This should be avoided because it can cause degradation of the fan insulation. - Freezing
At temperatures 0 ℃ +32 ℉ moisture such as that caused by condensation will freeze and lead to problems such as lockage of the moving parts and operation lags. Be careful to prevent this from happening. - Low-temperature, low-humidity environments
Do not leave the fan for a long period in an environment of low temperature and low humidity. Doing so may cause the plastic to become brittle. - When storing, avoid places of high temperature and high humidity or where corrosive gas is present.
- Do not store the fan any longer than six months.