Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

ACTB1CH2｜TB Relays

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

ACTB1CH2

Part Number

ACTB1CH2

Details

1 Form A

Product Name

 TB Relays

Features

Miniature PC Board, Twin / 1 Form C Type Automotive Relay

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberACTB1CH2
Product NumberACTB1CH2
Product details1 Form A
Protective constructionSealed
Terminal shapePC board type
Operating functionSingle side stable
Rated coil voltage12V DC
Operate (Set) voltage (at20℃) (Initial)Max. 6.5V DC
Release (Reset) voltage (at20℃) (Initial)Min. 0.8V DC
Rated operating current [±10%] (at 20℃)75 mA
Coil resistance [±10%] (at 20℃)160Ω
Rated operating Power900 mW
Usable voltage range10 to 16V DC
Heat resistance of typesHigh heat-resistant type
Contact arrangement1 Form A
Contact typeStandard type (Ag alloy / Cu clad)
Contact resistance (Initial)Max. 50mΩ (N.O. side: typ. 3mΩ, N.C. side: typ. 4mΩ) (By voltage drop 1A 6V DC)
Contact materialAg alloy
Rated switching capacity (resistive)20A 14V DC
Contact data: Max. carrying current25A for 10 minutes (Coil applied voltage 12V DC, at 20℃) (initial)
Min. switching load (resistive)1A 14V DC (at 20℃)
Insulated resistance (Initial)Min. 100 MΩ (at 500V DC, Measurement at same location as [Dielectric strength] section.)
Dielectric strength (Between open contacts) (Initial)500 Vrms for 1 min. (Detection current: 10mA)
Dielectric strength (Between contacts and coil) (Initial)500 Vrms for 1 min. (Detection current: 10mA)
Operate (Set) time
(at rated coil voltage) (at 20℃) (Initial)		Max. 10ms (Without contact bounce time)
Release (Reset) time
(at rated coil voltage) (at 20℃) (Initial)		Max. 10ms (Without contact bounce time) (Without diode)
Shock resistance: FunctionalMin. 100 m/s2 [approx. 10G] (Half-wave pulse of sine wave: 11ms; detection time: 10μs)
Shock resistance: DestructiveMin. 1,000 m/s2 [approx. 100G] (Half-wave pulse of sine wave: 6ms)
Vibration resistance: Functional10 to 100 Hz, Min. 44.1 m/s2 [approx. 4.5G] (Detection time: 10μs)
Vibration resistance: Destructive10 to 500 Hz, Min. 44.1 m/s2 [approx. 4.5G],
Time of vibration for each direction; X, Y direction: 2 hours, Z direction: 4 hours
Expected life: Mechanical lifeMin. 107 (at 120 cpm)
Expected life: Electrical[Resistive load]
Min. 105 at rated switching capacity,
Operating frequency: 1s ON, 9s OFF
[Motor load]
Min. 105 25 A 14V DC at motor lock condition,
Operating frequency: 0.5s ON, 9.5s OFF
ConditionsAmbient temperature: –40 to +110℃, Humidity: 2 to 85% RH (Avoid icing and condensation)
Unit weightApprox. 5 g
Packing styleTube
Inner carton (pieces)50
Outer carton (pieces)2,000

MENU

Recently checked products

Recently checked product numbers