ER-X032HC|脈衝AC方式 區域靜電消除器 ER-X
※ 實際商品可能與照片不同。
適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質
| 品名 | ER-X032HC |
|---|---|
| 型號 | ER-X032HC |
| 產品 | Pulse AC Method Area Ionizer |
| 詳細 | Head (High and low temperature resistant type) |
| 商品名稱 | 脈衝AC方式 區域靜電消除器 ER-X |
※為了商品改進,規格和外觀可能會在不事先通知的情況下變更,敬請諒解。
詳細規格
為了商品改進,規格和外觀可能會在不事先通知的情況下變更,敬請諒解。
| 項目 | 內容 |
|---|---|
| 品名 | ER-X032HC |
| 型號 | ER-X032HC |
| 產品名 | Pulse AC Method Area Ionizer |
| 適用標準及認證 | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), TÜV SÜD certification (USA, Canada) |
| Effective charge removal width | 320 mm 12.598 in approx. |
| 靜電消除時間 | 1 sec. or less (Note: Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.) |
| Ion balance | ±30 V or less (Note 1:Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.) (Note 2: Ion balance refers to the average value of plus and minus. The specification value is the typical one in condition used when ambient temperature change is less than ±10 ℃, ion balance is set after 30 minutes from the discharge start, the ion balance control function is set ON.) |
| Discharge method | Pulse AC method |
| Discharge frequency | 30 Hz (Note: Set the discharge frequency to 30 Hz. Do not use any other frequency.) |
| Discharge output voltage | ±7,000 V approx. |
| Ozone generation | 0.01 ppm or less (Note: Typical value in condition of discharge distance 100 mm 3.937 in, center of the product, discharge frequency 30 Hz and no air supply.) |
| Maximum air pressure | 0.1 MPa |
| Applicable fluid | Air (dried clean air) (Note:The dried clean air is the air dried (dew point : equivalent of -20 ℃ -4 ℉) and filtered (mesh-size : equivalent of 0.01 μm).) |
| Operating altitude | 2,000 m 6561.68 ft or less (Note:Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.) |
| 使用環境溫度 | Head : -60 to +200 ℃ -76 to +392 ℉ (No dew condensation or icing)(Note), Storage : -10 to +65 ℃ +14 to +149 ℉ High voltage unit : 0 to +50 ℃ +32 to +122 ℉ (No dew condensation), Storage : -10 to +65 ℃ +14 to +149 ℉ (Note): Discoloration of the head may occur when used under high temperatures, but it does not affect the charge removal performance. |
| 使用環境濕度 | 35 to 65 % RH, Storage : 35 to 85 % RH |
| Vibration resistance | 10 to 55 Hz frequency, 0.75 mm 0.030 in (Max. acceleration 50 m/s2) double amplitude in X, Y and Z directions for two hours each |
| Shock resistance | 100 m/s2 acceleration (10 G approx.), in X, Y and Z directions three times each |
| 外殼接地方式 | Floating |
| Material | Main unit enclosure : PPS, Stainless steal (SUS), Head mounting bracket : Stainless steal (SUS), Discharge needle : PC, PPS, Tungsten, Main unit enclosure of high-voltage unit : ABS |
| Length of high-voltage cable | Heat-resistant shielded cable, 1.8 m 5.906 ft |
| Weight | Net weight : 620 g approx. |
| 附屬品 | ø6 ø0.236-4 Air tube joint : 1 pc., Seal cap : 1 pc., Head mounting bracket (mounted at the factory) |
