Panasonic Industry ／ 制御機器
Panasonic Industry ／ 制御機器

GM1 Firmware Detailed Version-Up Information

Version-up Information

Version-Up Information (Ver.1.4.0.1 to Ver. 1.5.0.0) (November 25, 2024 update)

  • Added following models.
    • Serial Communication Unit
  • Added error clear per RTEX axis.
  • Fixed vulnerability CVE-2023-6357, JVNVU#97256167.

Version-Up Information (Ver.1.4.0.0 to Ver. 1.4.0.1) (April 15, 2024 update)

Corrected the following errors.

  • RETAIN and PERSISTENT variables error.

Version-Up Information (Ver.1.3.0.3 to Ver. 1.4.0.0) (November 8, 2023 update)

  • Expanded the maximum number of real axes for RTEX from 16 to 32 axes.
  • Added MQTT client.
  • Added DNS client.
  • Added SNTP client.
  • Added the project management function block.

Corrected the following errors.

  • Fixed FTP server timestamp information to local time display.
  • Improved starting Controller if expansion units are connected.
    Fixed Digital input / output unit, Analog input / output unit and Pulse output unit too.

Version-Up Information (Ver.1.3.0.2 to Ver. 1.3.0.3) (June 21, 2023 update)

Corrected the following errors.

  • Starting Controller may fails only if expansion units are connected.

Version-Up Information (Ver.1.3.0.1 to Ver. 1.3.0.2) (February 1, 2023 update)

Corrected the following errors.

  • Fixed a bug in the CNC function.

Version-Up Information (Ver.1.3.0.0 to Ver. 1.3.0.1) (September 26, 2022 update)

Corrected the following errors.

  • The motion task stops during error clear processing.

Version-Up Information (Ver.1.2.0.0 to Ver. 1.3.0.0) (June 13, 2022 update)

  • Added OPC UA server.
  • Added the comminication to display units. (Codesys V3 communication)
  • Added FTP server.
  • Added the project management. (SD backup and restore operating GM1 device directly)
  • Added the setting of whether to write the IP address.

Version-Up Information (Ver.1.0.1.0 to Ver. 1.2.0.0) (October 13, 2021 update)

  • Added following models.
    • GM1 Controller EtherCAT type
    • Digital output Unit(PNP)
    • Digital I/O Unit (PNP)
    • Analog input Unit
    • Analog output Unit
    • Pulse output Unit
  • Supported firmware update by GM Programmer (USB/LAN).
  • The operation mode of GM1 Controller RTEX type can be changed to RUN mode regardless of the running status of the MINAS.