LA-A1|LED式線性感測器LA-300 (English)
※ 實際商品可能與照片不同。
適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質
| 品名 | LA-A1 |
|---|---|
| 型號 | LA-A1 |
| 產品 | LED Collimated Beam Sensor |
| 詳細 | Amplifier (NPN output type) |
| 商品名稱 | LED式線性感測器LA-300 (English) |
※為了商品改進,規格和外觀可能會在不事先通知的情況下變更,敬請諒解。
詳細規格
為了商品改進,規格和外觀可能會在不事先通知的情況下變更,敬請諒解。
| 項目 | 內容 |
|---|---|
| 品名 | LA-A1 |
| 型號 | LA-A1 |
| 產品名 | LED Collimated Beam Sensor |
| 顯示價格 | Please contact our office |
| Type | NPN output type |
| 適合規制 | CE Marking (EMC Directive, RoHS Directive) |
| 配套的感測器頭部 | LA-305 |
| 電源電壓 | 12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less |
| 消耗電流 | 120 mA or less (including sensor heads) |
| Comparative outputs (HIGH, LOW) | NPN open-collector transistor -Maximum sink current: 100 mA -Applied voltage: 30 V DC or less (between comparative output and 0 V) -Residual voltage: 1.5 V or less (at 100 mA sink current), 0.5 V or less (at 16 mA sink current) |
| Comparative outputs (HIGH, LOW) : Utilization category | DC-12 or DC-13 |
| Comparative outputs (HIGH, LOW) : Response time | 0.5 ms or less |
| Comparative outputs (HIGH, LOW) : Output operation | HIGH output: ON when the received beam level is equal to or lower than HIGH (Over-dark) level LOW output: ON when the received beam level is equal to or higher than LOW (Under-dark) level |
| Comparative outputs (HIGH, LOW) : Short-circuit protection | Incorporated |
| 類比輸出 | Analog voltage Output voltage: 1 V (Darkest) to 5 V (Lightest) Output impedance: 75 Ohm |
| Analog output : Slew rate | 8 V/ms or more |
| Analog output : Temperature characteristics | 0.05 % F.S./℃ or less |
| External synchronization | Incorporated (Either gate trigger or edge trigger is selectable) |
| Indicators : Power | Green LED (lights up when the power is ON) |
| Indicators : Stable incident beam | Three green LEDs (light up in three stages in proportion to the amount of beam received) |
| Indicators : Operation | Two orange LEDs (light up when High and Low comparative outputs are ON, respectively) |
| Indicators : External synchronization | Green LED (lights up when the comparative outputs are effective) |
| Adjusters : Span | 15-turn adjuster sets the span for the analog output voltage |
| Adjusters : Shift | 15-turn adjuster sets the offset for the analog output voltage |
| Adjusters : HIGH (Over-dark) level | 15-turn adjuster sets the HIGH output threshold level (Over-dark level) |
| Adjusters : LOW (Under-dark) level | 15-turn adjuster sets the LOW output threshold level (Under-dark level) |
| Environmental resistance : Ambient temperature | 0 to +50 ℃ +32 to +122℉ (No dew condensation), Storage: -20 to +70℃ -4 to +158℉ |
| Environmental resistance : Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation resistance | 20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Environmental resistance : Vibration resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each |
| Environmental resistance : Shock resistance | 500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each |
| 材質 | Enclosure: Heat-resistant ABS Terminal cover: Heat-resistant ABS Front cover: Polycarbonate |
| 電線 | 0.22 mm2 (shield wire: 0.15 mm2) 7-core composite cabtyre cable, 2 m 6.562 ft long |
| 重量 | Net weight: 200 g approx. |
| Accessory | Adjusting screwdriver: 1 pc. |
