HL-T1010F|超小型雷射線性感測器 HL-T1
※ 實際商品可能與照片不同。
適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質
| 品名 | HL-T1010F |
|---|---|
| 型號 | HL-T1010F |
| 產品 | Ultra-compact Laser Collimated Beam Sensor |
| 詳細 | Sensor head (Sensing width 10 mm 0.394 in type) |
| 商品名稱 | 超小型雷射線性感測器 HL-T1 |
※為了商品改進,規格和外觀可能會在不事先通知的情況下變更,敬請諒解。
詳細規格
為了商品改進,規格和外觀可能會在不事先通知的情況下變更,敬請諒解。
| 項目 | 內容 |
|---|---|
| 品名 | HL-T1010F |
| 型號 | HL-T1010F |
| 產品名 | Ultra-compact Laser Collimated Beam Sensor |
| 顯示價格 | Please contact our office |
| Type | Sensing width 10 mm 0.394 in type |
| 適用控制器 | HL-AC1, HL-AC1P |
| Sensing range | ■■【In the case of(0 to 500 mm 0 to 19.685 in)】■■ Sensing width: ø1 mm ø0.039 in Min. sensing object: ø8 micro m ø0.315 mil opaque object Repeatability (During the state in which light is half blocked): 4 micro m 0.157 mil (Note:In case of an average sampling rate of 64 times.) Linear output resolution: 4 micro m 0.157 mil (Note) In case of an average sampling rate of 64 times. (Note)Value calculated with the linear output allowance factor (plus or minus 3 sigma) when connected to the controller included in the calculation of the detection width. (Note:This value was obtained by converting the range of linear output fluctuation (plus or minus 3 sigma) into a sensing width, assuming that the smallest sensing object blocks the beam at the approximate center of the beam diameter of ø1 mm ø0.039 in.) ■■【In the case of (500 to 2,000 mm 19.685 to 78.74 in)】■■ Sensing width: ø1 to ø2.5 mm ø0.039 to ø0.098 in Min. sensing object: ø50 micro m ø1.969 mil opaque object Repeatability (During the state in which light is half blocked): - Linear output resolution: - - |
| Emission indicator | Green LED (lights up during laser emission) |
| 防止干擾功能 | Two units of sensors can be mounted close together. (When the controller interference prevention function is used) |
| 汚損度 | 3 (industrial environment) |
| Environmental resistance : Ambient temperature | 0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage: -25 to +65 ℃ -13 to +149 ℉ |
| Environmental resistance : Ambient humidity | 35 to 85 % RH, Storage: 35 to 85 % RH |
| Environmental resistance : Ambient illuminance | Incandescent light: 10,000 liter x or less at the light-receiving face |
| Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
| Insulation resistance | 100 MOhm , or more, with 250 V DC megger between all supply terminals connected together and enclosure |
| Environmental resistance : Vibration resistance | 10 to 500 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each |
| Environmental resistance : Shock resistance | 300 m/s2 acceleration (30 G approx.) in X, Y and Z directions three times each |
| Emitting element | Red semiconductor laser(modulated, max. output: 0.35 mW, peak emission wavelength: 650 nm 0.026 mil) |
| Laser class | Class 1 (IEC / EN / JIS / GB), Class II (FDA) Maximum radiant energy per pulse: 8.77 nJ |
| 材質 | Enclosure: Polyetherimide Case cover: Polycarbonate Front cover: Glass |
| 電線 | 0.09mm2 3-core shielded cable with connector, 0.5 m 1.640 ft long |
| Cable extension | Extension up to total 10 m 32.808 ft is possible, with the optional cable. |
| 重量 | Emitter: 30 g approx. Receiver: 20 g approx. |
| Accessory | MS-LA3-1(Sensor head mounting bracket): One set of two brackets for both the emitter and the receiver CN-HLT1-1(Sensor head to controller connection cable): 1 cable Chinese explanatory label: 1pc. Laser beam alignment sticker: 2 pcs. Japanese / English explanatory label, label for opening section, caution label, label for protective casing: one each |
