{lead}
{name}
  • {name}
  • 日本語
  • English (Global)
  • English (Asia Pacific)
  • 简体中文
  • 繁體中文
  • 한국어
▼
Panasonic Industry ／ 制御機器
MENU
Panasonic Industry ／ 制御機器

HG-S1010-AC｜接觸式數位位移感測器 HG-S

下載

※ 實際商品可能與照片不同。

適合不含有規定:EU RoHS指令 2011/65/EU的6物質、以及EU RoHS指令2015/863/EU的4物質

品名

HG-S1010-AC

型號

HG-S1010-AC

產品

Contact-Type Digital Displacement Sensor

詳細

Air-driven type
10 mm 0.394 in type General purpose

商品名稱

 接觸式數位位移感測器 HG-S

聯繫我們

※為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。

詳細規格

為了商品改進，規格和外觀可能會在不事先通知的情況下變更，敬請諒解。
項目內容
品名HG-S1010-AC
型號HG-S1010-AC
產品名Contact-Type Digital Displacement Sensor
適合規制CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
適用控制器HG-SC101(-P), HG-SC111(-P), HG-SC112(-P), HG-SC113
(Note) : Be sure to use the sensor in combination with an HG-SC□ controller manufactured in or after February 2019.
位置檢測方法Optical absolute linear encoder method
測量範圍10 mm 0.394 in
(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm 0.004 in or more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point.
Stroke10.5 mm 0.413 in or more
(Note) : The position that represents "0" as an absolute value is a position where the spindle is pushed further down from the bottom dead point by 0.1 mm 0.004 in or more. The term "stroke" indicates the total stroke length from the bottom dead point to the top dead point.
Measuring force・Measuring force changes with the air pressure used. Removing the seal cap enables the product to be used as the low measuring force type.
・Refer to the product page or catalog for the relationship between supplid air pressure, spindle position and the measuring force.
解析度0.5 μm 0.02 mil
取樣週期1 ms
Indication accuracy(P-P)Full range: 2.0 μm 0.079 mil or less
Limited range: 1.0 μm 0.039 mil or less
(any 60 μm 2.362 mil)
Tip deviation amount35 μm 1.378 mil (typical value)
Hot swap functionIncorporated
Working pressure range0.14 to 0.16 MPa
With no seal cap mounted : 0.035 to 0.045 MPa
Capacity to resist pressure0.2 MPa
Usable fluidClean air (Dew point temperature: -10 ℃ +14 ℉ or less)
Applicable tubeOutside diameter: ø4 mm ø0.157 in / Inside diameter: ø2.5 mm ø0.098 in
動作指示燈Equipped (2-color LED: Orange / Green)
汚損度2
使用標高2,000 m 6561.68 ft or less
(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.
耐環境性能: 保護構造IP67 (IEC)
With no seal cap mounted : -
(Note) : Protective structure is not applicable when the sealing portions have deteriorated or become damaged. The protection level is zero when the seal cap is removed.
Environmental resistance : Ambient temperature-10 to +55 ℃ +14 to +131 ℉ (No dew condensation or icing allowed),
Storage: -20 to +60 ℃ -4 to +140 ℉
Environmental resistance : Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Insulation resistance100 MΩ or more at 250 V DC
Environmental resistance : Vibration resistance10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (10 to 58 Hz), maximum acceleration 196 m/s2, (58 to 150 Hz) in X, Y, and Z directions for two hours each
Environmental resistance : Shock resistance1,960 m/s2 acceleration in X, Y, and Z directions three times each
接地方式Capacitor grounding
材質Body: Zinc, Holder: Stainless steel, Spindle: Tool steel, Probe (Note): Brass (body) / Ceramic (ball),, Air tube clamp: S60CM
(Note) : The probe is also available as an option.
重量Net weight: 80 g approx.
AccessorySensor head fastening wrench: 1 pc., Mounting nut: 1 pc., Seal cap: 1pc, Air tube clamp: 1 pc.
備註Where measurement conditions are not specified, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature of +20 ℃ +68 ℉, and a clean atmosphere where water, oil, other liquids or dust does not come in contact with the equipment.

MENU

最近搜尋過的產品

最近搜尋過的產品型號