{lead}
{name}
  • {name}
  • 日本語
  • English (Global)
  • English (Asia Pacific)
  • 简体中文
  • 繁體中文
  • 한국어
▼
파나소닉 인더스트리 / 제어 기기
파나소닉 인더스트리 / 제어 기기

FP Loader Ver2.60

Information you need to know before using the software (Essential reading)

About FP Loader Ver2.60

FP Loader (hereinafter referred to as this software) utility is designed to download, to a PLC, program files created with NPST-GR or FPWIN. It supports all FP series PLCs(without FP7, FP-XH Ethernet type and FP0H).

  • Programs cannot be uploaded.
  • Only program files can be downloaded. (Comments, etc., cannot be downloaded.)
  • The USB port of FP0R can be used in case the USB driver is "PIDSX PLC USB-COM".
    The other driver like "Panasonic Electric Works PLC Virtual UART" is not available.

You cannot download programs under the following conditions.

  • When reading of a file fails.
  • When communication with the PLC cannot be established
  • When the PLC is in RUN mode.
    (You can switch to REMOTE-PROG when the PLC is in REMOTE-RUN mode.)
  • When the PLC type of the selected file is different from the PLC type actually connected
    (including difference in capacity).
  • When the PLC is password protected and the password is unknown.

Version-Up Information (Ver.2.50 to Ver.2.60)

  • Changed the company name to Panasonic Industry Co., Ltd. due to the business succession. (License agreement etc.)
  • Supported FP-XH except Ethernet type.

Version-Up Information (Ver.2.40 to Ver.2.50)

  • Supports FP2SH 32K.
  • Supports FP-X0.

Version-Up Information (Ver.2.30 to Ver.2.40)

  • Supports FP0R.
    note) The USB port of FP0R can not be used.

Version-Up Information (Ver.2.21 to Ver.2.30)

  • Supports FP-X transistor type.

Version-Up Information (Ver.2.20 to Ver.2.21)

  • The problem, that the data value became 0, was improved, even if you did not check [Clear Data].

Version-Up Information (Ver.2.10 to Ver.2.20)

  • Supports FPSigma 32K.

Version-Up Information (Ver.1.22 to Ver.2.10)

The following points have been upgraded.

  • Supports FP-X.
  • Prepare 3 modes as download method.
  • - 1:1     :    Downloads the specified file for the PLC directly connected.
    - 1:1(Unit number changing is possible)    :    Downloads the system register changing the PLC unit number for the PLC directly connected.
    - 1:N    :    Downloads the specified file to the multiple PLC units.
  • Improve the download function, when you check [Clear data].
  • PLC data can be cleared before downloading.
  • PLC mode can be changed when continuously processing downloading.
  • Improve the automatic COM port scan.

Software License Agreement

Please note that acceptance of the Software License Agreement is a condition for using this software.
Please carefully review the contents and proceed with the installation only if you agree to its terms.

System Requirements

Make sure that the computer on which you intend to run the software meets the minimum specifications listed below.

OSWindows 10*1/ 11
LanguageThe display language will be Japanese when a Japanese OS is used. Otherwise the display language will be English.
Applicable PLCsAll FP series (without FP7, FP-XH Ethernet type and FP0H)


*1    64 bit edition

How to Install

1.Click on the title of the file name (listed below) that you want to download and indicate the download destination.

*When you already have indicated the download destination, the file will be downloaded automatically.

If you do not agree to the "Software License Agreement," you will not be able to download this software.
Please read the "Software License Agreement" in its entirety and check "I have read and agree to the license agreement."

2.Decompress the downloaded file.

3.Double-click the file in the decompressed folder to activate FPLoader.