Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

DP-102ZL3-M-P｜Dual Display Digital Pressure Sensor [For Gas] DP-100L

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

DP-102ZL3-M-P

Part Number

DP-102ZL3-M-P

Product

Dual Display Digital Pressure Sensor [For Gas]

Details

Discrete wire type

Product Name

 Dual Display Digital Pressure Sensor [For Gas] DP-100L

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberDP-102ZL3-M-P
Product NumberDP-102ZL3-M-P
Products NameDual Display Digital Pressure Sensor [For Gas]
Product detailsDiscrete wire type
Regulatory compliance and certificationCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), UL/c-UL Certification
Type of pressureGauge pressure
Rated pressure range-0.100 to +1.000 Mpa
Set pressure range-0.101 to +1.010MPa
Pressure withstandability1.5MPa
Applicable fluidNon-corrosive gas
Supply voltage12 to 24 V DC ±10 % Ripple P-P 10 % or less
Power consumptionNormal operation: 720 mW or less (Current consumption 30 mA or less at 24 V supply voltage)
ECO mode: 480 mW or less at STD (Current consumption 20 mA or less at 24 V supply voltage)
360 mW or less at FULL (Current consumption 15 mA or less at 24 V supply voltage)
Communication output (C/Q):IO-Link communicationIO-Link Specification V1.1
(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Communication output (C/Q):Baud rateCOM3 (230.4 kbps)
(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Communication output (C/Q):Process data4 byte
(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Communication output (C/Q):Minimum cycle time1.0ms
(Note:)When the sensor is used as an ordinary sensor, the communication output (C/Q) provides the same output operation as the control output (DO).
Control output (DO)PNP open-collector transistor
•Maximum source current: 50 mA
• Applied voltage: 30 V DC or less (between output and +V)
• Residual voltage: 2 V or less (at 50 mA source current)
Control output (DO):Output operationN.O./N.C. (selectable by key operation)
Control output (DO):Output operationOutput modesEASY mode / Hysteresis mode / Window comparator mode
Control output (DO):HysteresisMinimum 1 digit (variable)
Control output (DO):Repeatability±0.2 % F.S. (within ±2 digits)
Control output (DO):Response time2.5 ms, 5 ms, 10 ms, 25 ms, 50 ms, 100 ms, 250 ms, 500 ms, 1,000 ms, 5,000 ms, selectable by key operation
Control output (DO):Short-circuit protectionIncorporated
Display4 digits + 4 digits 3-color LCD display (Display refresh rate: 250 ms, 500 ms, 1,000 ms, selectable by key operation)
Display:Displayable pressure range-0.101 to +1.010MPa
Output indicatorOrange LED(Output operation indicator 1: Flashes during IO-Link communication, Lights up when the control output is ON during non-IO-Link communication (synchronized with the output operation indicator 2)
Output operation indicator 2: Lights up when the control output is ON)
ProtectionIP40(IEC）
Ambient temperature－10 to +50℃ +14 to +122 ℉(No dew condensation or icing allowed), Storage: －10 to +60℃ +14 to +140 ℉
Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance50 MΩ or more with 500 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 500 Hz frequency, 3 mm 0.118 in double amplitude or maximum acceleration 196 m/s2, in X, Y and Z directions for two hours each(when panel or flat attachment is mounted: 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each)
Shock resistance100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Temperature characteristicsWithin ±1 % F.S.
(at +20℃ +68℉)
Pressure portM5 female thread
MaterialEnclosure: PBT (glass fiber reinforced), LCD display: Acrylic, Pressure port: Stainless steel (SUS303) , Mounting threaded part: Brass (nickel plated), Switch part: Silicone rubber
Connecting methodConnector
Cable lengthTotal length up to 20 m 65.617 ft (Condition of CE compliance less than 20 m 65.617 ft) is possible with 0.3 mm2, or more, cable.
WeightNet weight: 30 g approx., Gross weight: 125 g approx.
AccessoriesCN-14A-C2 (Connector attached cable 2 m 6.562 ft): 1 pc.
Remark(Note:)measurement conditions have not been specified precisely, the conditions used were an ambient temperature of +20℃ +68℉.

MENU

Recently checked products

Recently checked product numbers