Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

DPH-103-M3｜Head-separated Dual Display Digital Pressure Sensor [For Gas] DPS-400 / DPH-100

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

DPH-103-M3

Part Number

DPH-103-M3

Product

Head-separated Dual Display Digital Pressure Sensor [For gas]

Details

Sensor head

Product Name

 Head-separated Dual Display Digital Pressure Sensor [For Gas] DPS-400 / DPH-100

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberDPH-103-M3
Product NumberDPH-103-M3
Products NameHead-separated Dual Display Digital Pressure Sensor [For gas]
Product detailsSensor head
CE marking directive complianceEMC Directive, RoHS Directive
Type of pressureGauge pressure
Rated pressure range0 to -101.0 kPa
Pressure withstandability500 kPa
Applicable fluidAir, non-corrosive gas
Supply voltage12 to 24 V DC ± 10 % Ripple P-P 10 % or less
Current consumption15 mA or less
Analog voltage outputOutput voltage : 1 to 5 V (over rated pressure range)
Zero point : within 1 V ± 2.5 % F.S. (vacuum / positive pressure type)
within 3 V ± 3 % F.S. (compound pressure type)
Span : within 4 V ± 3.5 % F.S.
Linearity : within ±0.5 % F.S.
Output impedance : 1 kΩ approx.
ProtectionIP40 (IEC)
Ambient temperature0 to +50 ℃ +32 to +122 ℉ (No dew condensation allowed), Storage : -10 to +60 ℃ +14 to +140 ℉
Ambient humidity35 to 85 % RH, Storage : 35 to 85 % RH
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance50 MΩ, or more, with 500 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 500 Hz frequency, amplitude 3 mm 0.118 in or maximum acceleration 196 m/s2, in X, Y and Z directions for two hours each
Shock resistance1,000 m/s2 acceleration (100 G approx.) in X, Y and Z directions for three times each
Temperature characteristicsOver ambient temperature range 0 to +50 ℃ +32 to +122 ℉ : within ±2 % F.S. of detected pressure at +25 ℃ +77 ℉
Pressure portM3 male thread (for installing gasket)
MaterialFront case : PBT, Rear case : PBT (glass fiber reinforced), Pressure port : Stainless steel (SUS303), O-ring : NBR
Pressure element : Silicon diaphragm, PPS
Connecting methodConnector
Cable0.2 mm2 4-core oil resistant cabtyre cable (Models with "-R" affixed to the Model No. have bending-resistant, oil-resistant cabtyre cable)
Cable extensionExtension up to total 10 m 32.808 ft is possible with 0.2 mm2, or more, cable.
Weight : Net weightHead 6 g approx. / Cable 40 g approx.
Weight : Gross weight70 g approx.
AccessoriesConnector (e-CON) : 1 pc.
RemarkWhere measurement conditions have not been specifi ed precisely, the conditions used were an ambient temperature of +25 ℃ +77 ℉.
The sensor head can be used independently.

MENU

Recently checked products

Recently checked product numbers