Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

AFP7CPS31E｜FP7

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    AFP7CPS31E

    Part Number

    AFP7CPS31E

    Product

    FP7 CPU units

    Product Name

    		 FP7
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberAFP7CPS31E
    Product NumberAFP7CPS31E
    Products NameFP7 CPU units
    The price of the productPlease contact our office

    Control specifications

    ItemSpecifications
    Memory capacity:Memory selection pattern1Program (steps): 121,500
    Data register (Note 1): 131,072
    Number of max. program block (PB): 243
    (Note) The factory default setting is pattern 1.
    (Note 1) For data register (DT), data up to 262,144 words can be backed up.
    Memory capacity:Memory selection pattern2Program (steps): 96,000
    Data register (Note) : 262,144
    Number of max. program block (PB): 192
    (Note) For data register (DT), data up to 262,144 words can be backed up.
    Memory capacity:Memory selection pattern3Program (steps): 64,000
    Data register (Note) : 425,984
    Number of max. program block (PB): 128
    (Note) For data register (DT), data up to 262,144 words can be backed up.
    Memory capacity:Memory selection pattern4Program (steps): 32,000
    Data register (Note) : 589,824
    Number of max. program block (PB): 64
    (Note) For data register (DT), data up to 262,144 words can be backed up.
    Programming methodRelay symbol method
    Control methodCyclic operation method
    Program memoryBuilt-in flash ROM (no backup battery required)
    Operation speedBasic instruction: min. 11 ns/step
    External input (X)8,192 points
    (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.
    External output (Y)8,192 points
    (Note) Hardware configuration governs the actually usable number of I/O points. When I/O points are not actually used, usable as internal relays.
    Internal relay (R)32,768 points
    System relay (SR)Indicate operation status of various relays is shown.
    Link relay (L)16,384 points
    Timer (T)4,096 points: Timer capable of counting (units: 10 micro s, 1 ms, 10 ms, 100 ms or 1 sec.) x 4,294,967,295
    Counter (C)1,024 points, Counter capable of counting 1 to 4,294,967,295
    Link data register (LD)16,384 words
    System data register (SD)Internal operation status of various registers is shown.
    Index register (I0 to IE)15 long words / With switching function
    Master control relay (MCR)Unlimited
    Number of labels (LOOP)Max. 65,535 points for each program block (PB)
    Differential pointsUnlimited
    Number of step laddersUnlimited
    Number of subroutinesMax. 65,535 points for each program block (PB)
    Number of interrupt program1 periodical interrupt program
    SD memory card functionSDHC memory cards of up to 32 GB are usable.
    Constant scanAvailable (0 to 125 ms)
    Clock / calendarYear (last two digits), month, day, hours (24-hour display) minutes, seconds, day of week
    (Note)Precision of calendar; At 0 ℃ +32 ℉, 95 sec. or less error per month, at +25 ℃ +77 ℉, 15 sec. or less error per month, at +55 ℃ +131 ℉, 130 sec. or less error per month
    Battery life (Value applies when no power is supplied at all.)3.3 years or more (when no power is supplied) actual usage value: 20 years approx. (at 25 degrees 77 degrees Fahrenheit )
    Safety functionPassword / Restricted distribution / Read disable setting / Encryption
    PLC link function
    (Serial communication / MEWNET-W0)    		Max. 16 units, link relays: 1,024 points, link registers: 128 words. (Data transfer and remote programming are not supported) (Link area allocation is switchable between the first and the second half)

    Communication specifications for COM port

    ItemSpecifications
    InterfaceRS-232C, three-wire system, 1 channel
    (Note) SD, RD and SG terminals are isolated from internal circuits.
    Transmission distance15 m 49.213 ft
    Transmission speed300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400 bits/sec,
    Communication methodHalf-duplex system
    Synchronous methodStart-stop synchronization system
    Transmission formatStop bit: 1 bit / 2 bits
    Parity: none / odd / even
    Data length: 7 bits / 8 bits
    Start code: with STX / without STX
    End code: CR / CR + LF / none / ETX
    Data transmission orderTransmit from bit 0 in character units.
    ConnectionGeneral-purpose communication, Computer link and MODBUS-RTU

    Dedicated power supply output port specifications for GT series programmable display

    ItemSpecifications
    Terminal:5VFor 5 V DC type GT series Programmable Display
    (Note) 5 V and 24 V DC types are not usable at the same time.
    Terminal:24VFor 24 V DC type GT series Programmable Display
    (Note 1) 5 V and 24 V DC types are not usable at the same time.
    (Note 2) Use 21.6 to 26.4 V DC to power the CPU unit. Please check the “GT Series Hardware Manual” for grounding of the GT series programmable display.

    LAN communication port specifications

    ItemSpecifications
    Communication interfaceEthernet 100BASE-TX / 10BASE-TX
    Communication speed100 Mbps, 10 Mbps auto negotiation function
    Total cable length100 m 328 ft (500 m 1,640 ft when a repeater is used)
    Number of nodesMax. 254 units
    Number of simultaneous connectionsMax. 220 connections (user connection: 216, system connection: 4)
    Communication protocol (Communication layer)TCP / IP, UDP
    DNSSupports name servers
    DHCP / DHCPV6Automatic IP address acquisition
    FTP server / Client (SSL compatible)Server function, file transfer, number of user: 3
    Client function, data and file transfer
    HTTP server / Client (SSL compatible)Server function, system web, Customer web (8 MB), number of concurrent session: 16
    Client function, data transfer
    SMTP client (SSL compatible) Client function, mail transfer
    SNTPTime adjustment function
    General-purpose communication16 kB / 1 connection (user connection: 1 to 16)
    Dedicated communicationSlave communication (MEWTOCOL-COM, MEWTOCOL7-COM, MEWTOCOL-DAT, MODBUS-TCP, MC protocol (Note))
    Master communication (MEWTOCOL-COM, MEWTOCOL-DAT, MODBUS-TCP, MC protocol (Note))
    (Note): MC protocol is a short form denoting MELSEC communication protocol; MELSEC is a registered trademark of Mitsubishi Electric Corporation. QnA compatible 3E frame, only binary (bulk writing and bulk reading) use is available.

    Common general specifications

    ItemSpecifications
    Ambient temperature0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉
    Ambient humidity10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)
    Vibration resistance5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions
    Shock resistance147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2)
    Noise immunity1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)
    Operating conditionFree from corrosive gasses and excessive dust

    Individual general specifications

    ItemSpecifications
    Rated voltage range20.4 to 28.8 V DC
    Current consumption200 mA or less
    Net weight220 g approx. (with terminal block and end unit)

    MENU

    Recently checked products

    Recently checked product numbers