Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

AFPRP2Y04R｜FP7 PHLS (Remote I/O) unit

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    AFPRP2Y04R

    Part Number

    AFPRP2Y04R

    Product

    FP7 PHLS (Remote I/O) unit

    Details

    PHLS Slave units

    Product Name

    		 FP7 PHLS (Remote I/O) unit
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberAFPRP2Y04R
    Product NumberAFPRP2Y04R
    Products NameFP7 PHLS (Remote I/O) unit
    Product detailsPHLS Slave units
    The price of the productPlease contact our office

    COMMUNICATION SPECIFICATIONS (Common)

    ItemSpecifications
    Communication methodTwo-wire system half duplex
    Insulation methodPulse transformer insulation
    Communication speed6 Mbps / 12 Mbps
    Synchronous methodBit synchronization
    Error checkCRC-12
    Communication distanceTotal length 200 m 656 ft (at 6 Mbps) / 100 m 328 ft (at 12 Mbps)
    (Note) Performance when the recommended cable is used Use of the recommended cable is necessary to achieve the maximum transmission distance and number of slave units.
    Connection methodMulti-drop method
    Impedance100 Ohm
    TerminatorMounted on unit
    External interfaceConnector-type terminal block

    INPUT SIDE SPECIFICATIONS

    ItemSpecifications
    Insulation methodNon-isolated
    Rated input voltage24 V DC
    Rated input current4.3 mA approx.
    Input impedance5.6 kOhm approx.
    Min. ON voltage / Min. ON current17 V / 2 mA
    Max. OFF voltage / Max. OFF current5 V / 0.5 mA
    Response time:OFF→ON1 ms or less
    Response time:ON→OFF1 ms or less

    OUTPUT SIDE SPECIFICATIONS (Relay)

    ItemSpecifications
    Insulation methodRelay insulation
    Rated control capacity1 A 250 V AC (2 A/common)
    1 A 30 V DC (2 A/common)
    Min. load0.1 mA 100 mV (resistive load)
    Response time:OFF→ON10 ms or less
    Response time:ON→OFF5 ms or less
    Life time:Mechanical life2 x 10 7 operations or more
    Life time:Electrical life1 x 10 5 operations or more (switching frequency: 20 times/minute)
    Surge absorberNone
    Short circuit protectionNone

    COMMON GENERAL SPECIFICATIONS

    ItemSpecifications
    Ambient temperature0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉
    Ambient humidity10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)
    Vibration resistance5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions
    Shock resistance147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2)
    Noise immunity1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)
    Operating conditionFree from corrosive gasses and excessive dust

    INDIVIDUAL GENERAL SPECIFICATIONS

    ItemSpecifications
    Rated voltage range20.4 to 28.8 V DC
    Current consumption85 mA or less
    Net weight75 g approx.

    MENU

    Recently checked products

    Recently checked product numbers