Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

AFPRP1X16D2｜FP7 PHLS (Remote I/O) unit

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

AFPRP1X16D2

Part Number

AFPRP1X16D2

Product

FP7 PHLS (Remote I/O) unit

Details

PHLS Slave units

Product Name

 FP7 PHLS (Remote I/O) unit

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberAFPRP1X16D2
Product NumberAFPRP1X16D2
Products NameFP7 PHLS (Remote I/O) unit
Product detailsPHLS Slave units
The price of the productPlease contact our office

COMMUNICATION SPECIFICATIONS (Common)

ItemSpecifications
Communication methodTwo-wire system half duplex
Insulation methodPulse transformer insulation
Communication speed6 Mbps / 12 Mbps
Synchronous methodBit synchronization
Error checkCRC-12
Communication distanceTotal length 200 m 656 ft (at 6 Mbps) / 100 m 328 ft (at 12 Mbps)
(Note) Performance when the recommended cable is used Use of the recommended cable is necessary to achieve the maximum transmission distance and number of slave units.
Connection methodMulti-drop method
Impedance100 Ohm
TerminatorMounted on unit
External interfaceScrew-type terminal block

INPUT SIDE SPECIFICATIONS

ItemSpecifications
Insulation methodPhotocoupler insulation
Rated input voltage24 V DC
Rated input current3 mA approx.
Input impedance7.5 kOhm approx.
Min. ON voltage / Min. ON current15 V / 2 mA
Max. OFF voltage / Max. OFF current5 V / 0.5 mA
Response time:OFF→ON1 ms or less
Response time:ON→OFF1 ms or less

OUTPUT SIDE SPECIFICATIONS (Except relay)

ItemSpecifications
Insulation methodPhotocoupler insulation
Output typeSink type (Open collector output)
Rated load voltage20.4 to 28.8 V DC
Max. control capacity0.1 A/point
Max. surge current0.5 A
OFF state leakage current0.1 mA or less
ON state maximum voltage drop0.5 V or less
Response time:OFF→ON0.05 ms or less
Response time:ON→OFF0.5 ms or less
Surge absorberZener diode
Short circuit protectionNone

COMMON GENERAL SPECIFICATIONS

ItemSpecifications
Ambient temperature0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉
Ambient humidity10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)
Vibration resistance5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions
Shock resistance147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2)
Noise immunity1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)
Operating conditionFree from corrosive gasses and excessive dust

INDIVIDUAL GENERAL SPECIFICATIONS

ItemSpecifications
Rated voltage range20.4 to 28.8 V DC
Current consumption150 mA or less
Net weight210 g approx.

MENU

Recently checked products

Recently checked product numbers