Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

AFP7MXY32DWD｜Multi input/output unit

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

AFP7MXY32DWD

Part Number

AFP7MXY32DWD

Product

FP7 Multi Input/Output Units

Product Name

 Multi input/output unit

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberAFP7MXY32DWD
Product NumberAFP7MXY32DWD
Products NameFP7 Multi Input/Output Units

Function specifications

ItemSpecifications
Basic input and output : Number of occupied I/O pointsInput/Output: 64 points each (4 words)
Basic input and output : Number of external I/O pointsInput: 16 points, Output: 16 points
Basic input and output : Input time constant settingNone, 0.5 μs, 1 μs, 2 μs, 4 μs, 8 μs, 16 μs, 32 μs, 64 μs, 96 μs, 128 μs, 256 μs, 2 ms, 4 ms, 8 ms
Setting possible in 2-point units
Basic input and output : Output polarity settingNo output, N channel, P channel, Both channels (push pull output), Differential output
Setting possible in 4-point units
Interrupt : Number of points8 points/unit
(Max. of 8 units can be used with FP7 system.)
Interrupt : ModeNon-interrupt unit, Interrupt unit
(Set using DIP switches)
Interrupt : Interrupt condition settingTerminal input, Comparison match
Counter : Counter typeRing counter
Linear counter
Counter : Input modeDirection distinction, Individual input, Phase input
Counter : Number of channels4 channels
(Note) : When using elapsed value hold function, number of channels will be limited.
Counter : Counting rangeSigned 32 bit (-2,147,483,648 to +2,174,483,647)
Setting possible of upper and lower limits
Counter : Max. counting speed5 V input voltage: 500 kHz
12 V input voltage: 500 kHz (350 kHz with phase input)
24 V input voltage: 250 kHz (180 kHz with phase input)
(Note) With 50 % duty input pulse.
Counter : Min. input pulse width0.5 μs
Counter : Comparison output settingMax. 8 points
Terminal input counter: 4 channels
Counter : OthersTransfer multiplication function (x 1, x 2, x 4)
Elapsed value offset / preset function
Elapsed value hold function, setting of upper / lower count limits
Input pulse frequency measurement
Overflow / underflow detection
Pulse output : Number of channels4 channels
Pulse output : Output modeDirection distinction, Individual output, Phase output, Comparison match stop
Pulse output : Output terminals : Pulse output function2 terminals / channel (B11 to B18 terminals)
Pulse output : Output terminals : PWM output function1 terminal / channel (B11, B13, B15 and B17 terminals)
Pulse output : Output frequency : Pulse output function1 to 500 kHz (Settable by 1 Hz)
(Note) : When push pull setting or output current is 0.1 A. Varies according to load.
Pulse output : Output frequency : PWM output function1 to 100 kHz (Settable by 1 Hz)
(Note) : When push pull setting or output current is 0.1 A. Varies according to load.
Pulse output : Duty ratio : Pulse output function50 % approx. (Fixed)
Pulse output : Duty ratio : PWM output function0 to 100 % (Settable by 0.1%)
Pulse output : Other functionsPulse number measurement function (dedicated pulse counter 4 channels)

COMMON GENERAL SPECIFICATIONS

ItemSpecifications
Ambient temperature0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉
Ambient humidity10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)
Vibration resistance5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions
Shock resistance147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2)
Noise immunity1,000 V [p-p] with pulse width 50 ns and 1 μs (using a noise simulator)
Operating conditionFree from corrosive gasses and excessive dust

INDIVIDUAL GENERAL SPECIFICATIONS

ItemSpecifications
Rated voltage range-
Current consumption100 mA or less
Net weight100 g approx.

MENU

Recently checked products

Recently checked product numbers