Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

AFP7MC64EC｜FP7 Motion control unit

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

AFP7MC64EC

Part Number

AFP7MC64EC

Product

FP7 Motion Control Unit

Details

EtherCAT type

Product Name

 FP7 Motion control unit

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberAFP7MC64EC
Product NumberAFP7MC64EC
Products NameFP7 Motion Control Unit
Product detailsEtherCAT type
Connected slavePanasonic AC servo motor MINAS A6B / A5B series
EtherCAT-compatible S-LINK V gateway controller SL-VGU1-EC
(Note1) A6B and SL-VGU1-EC are compatible with the FP7 motion control unit Ver.1.2 or later.
(Note2) One unit or more A6B or A5B must exist on the network. Also, A6B and A5B can both be used on the network.
(Note3) The hub for EtherCAT / Ethernet cannot be used.
Number of control axesReal axis : 64 axes
Virtual axis : 32 axes
Communication cycle0.5ms / 1ms / 2ms / 4ms
Interpolation control2-axis linear interpolation, 2-axis circular interpolation,
3-axis linear interpolation and 3-axis spiral interpolation
Number of occupied I/O pointsInput : 16 points, Output : 16 points
Automatic operation : Positioning control (CSP) : Position specification methodAbsolute (specified absolute position), Increment (specified relative position)
Automatic operation : Positioning control (CSP) : Position specified unitpulse
μm (select a minimum instruction unit of 0.1 μm or 1 μm)
inch (select a minimum instruction unit of 0.00001 inch or 0.0001 inch)
degree (select a minimum instruction unit of 0.1 degree or 1 degree)
Automatic operation : Positioning control (CSP) : Position reference rangepulse : -2,147,483,648 to 2,147,483,647pulse
μm (0.1μm) : -214,748,364.8 to 214,748,364.7μm
μm (1μm) : -2,147,483,648 to 2,147,483,647μm
inch (0.00001inch) : -21,474.83648 to 21,474.83647inch
inch (0.0001inch) : -214,748.3648 to 214,748.3647inch
degree (0.1degree) : -214,748,364.8 to 214,748,364.7degree
degree (1degree) : -2,147,483,648 to 2,147,483,647degree
Automatic operation : Positioning control (CSP) : Speed reference rangepulse : 1～2,147,483,647pps
μm : 1～2,147,483,647μm/s
inch : 0.001～2,147,483.647inch/s
degree : 0.001～2,147,483.647rev/s
Automatic operation : Positioning control (CSP) : Acceleration / deceleration typeLinear acceleration/deceleration,
S-shaped acceleration/deceleration
Automatic operation : Positioning control (CSP) : Acceleration / deceleration time0 to 10,000ms(adjustable in 1 ms increments)
Automatic operation : Positioning control (CSP) : Number of positioning tablesEach axis : 1,000 points
Automatic operation : Positioning control (CSP) : Control method : IndependentPTP control (E point control, C point control), CP control (P point control), Speed control (J point control)
Automatic operation : Positioning control (CSP) : Control method : 2-axis interpolation : Linear interpolationE point, P point and C point controls : Specify synthesis speed or major axis speed
Automatic operation : Positioning control (CSP) : Control method : 2-axis interpolation : Circular interpolationE point, P point and C point controls : Center point or passing point
Automatic operation : Positioning control (CSP) : Control method : 3-axis interpolation : Linear interpolationE point, P point and C point controls : Specify synthesis speed or major axis speed
Automatic operation : Positioning control (CSP) : Control method : 3-axis interpolation : Spiral interpolationE point, P point and C point controls : Center point or passing point
Automatic operation : Positioning control (CSP) : Other function : Dwell time0 to 32,767ms (adjustable in 1 ms increments)
Manual operation : JOG/inching operation : Speed reference rangepulse : 1～2,147,483,647pps
μm : 1～2,147,483,647μm/s
inch : 0.001～2,147,483.647inch/s
degree : 0.001～2,147,483.647rev/s
Manual operation : JOG/inching operation : Acceleration / deceleration typeLinear acceleration/deceleration,
S-shaped acceleration/deceleration
Manual operation : JOG/inching operation : Acceleration / deceleration time0 to 10,000ms (adjustable in 1 ms increments)
Manual operation : Home return : Speed reference rangepulse : 1～2,147,483,647pps
μm : 1～2,147,483,647μm/s
inch : 0.001～2,147,483.647inch/s
degree : 0.001～2,147,483.647rev/s
Manual operation : Home return : Acceleration / deceleration typeLinear acceleration/deceleration,
S-shaped acceleration/deceleration
Manual operation : Home return : Acceleration / deceleration time0 to 10,000ms (adjustable in 1 ms increments)
Manual operation : Home return : Return methodsDOG method (4 types), Limit method (2 types), Data set method, Z phase method, Stop-on-contact method (2 types)
Stop function : Deceleration stop : Deceleration timeAxis operation mode startup time of activated axis
Stop function : Emergency stop : Deceleration time0 to 10,000 ms (adjustable in 1 ms increments)
Stop function : Limit stop : Deceleration time0 to 10,000 ms (adjustable in 1 ms increments)
Stop function : Error stop : Deceleration time0 to 10,000 ms (adjustable in 1 ms increments)
Stop function : System stop : Deceleration timeImmediate stop (1 ms), all axes stop
Synchronous operation function : Synchronous basic setting : Master axisSelection possible of real axis and virtual axis
Synchronous operation function : Synchronous basic setting : Slave axisMax. 32 axes/master
Synchronous operation function : Electronic gear function : Operation settingGear ratio setting
Synchronous operation function : Electronic gear function : Operation methodDirect method, Acceleration/deceleration method
Synchronous operation function : Electronic clutch function : Clutch ON triggerContact input
Synchronous operation function : Electronic clutch function : Clutch methodDirect method, Linear slide method
Synchronous operation function : Electronic cam function : Cam curveSelect from 20 types
Multiple curves can be specified within a phase (0 to 100 %).
Synchronous operation function : Electronic cam function : Resolution1024, 2048, 4096, 8192, 16384, 32768
Synchronous operation function : Electronic cam function : Number of cam patterns64 to 256
(Depends on resolution)
Other specifications : Software limit function : Set rangepulse : -2,147,483,648 to 2,147,483,647pulse
μm (0.1μm) : -214,748,364.8 to 214,748,364.7μm
μm (1μm) : -2,147,483,648 to 2,147,483,647μm
inch (0.00001inch) : -21,474.83648 to 21,474.83647inch
inch (0.0001inch) : -214,748.3648 to 214,748.3647inch
degree (0.1degree) : -214,748,364.8 to 214,748,364.7degree
degree (1degree) : -2,147,483,648 to 2,147,483,647degree
Other specifications : Monitor judgment : Torque judgmentTorque judgment
Selection possible of active/non-active and error/warning 0.0 to ±500.0 %
Other specifications : Monitor judgment : Actual speed judgmentActual speed judgment
Selection possible of active/non-active and error/warning 0.0 to ±5,000 rpm
Other specifications : BackupParameters and positioning data are saved to flash memory (battery free)
Other specifications・Limit input CWL, CCWL monitor and proximity (DOG) monitor
・General-purpose input : 5 points, General-purpose output : 1 point (I/O from AMP)
・Auxiliary output contact and auxiliary output cord

COMMON GENERAL SPECIFICATIONS

ItemSpecifications
Ambient temperature0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉
Ambient humidity10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)
Vibration resistance5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions
Shock resistance147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2)
Noise immunity1,000 V [p-p] with pulse width 50 ns and 1 μs (using a noise simulator)
Operating conditionFree from corrosive gasses and excessive dust

INDIVIDUAL GENERAL SPECIFICATIONS

ItemSpecifications
Rated voltage range-
Current consumption180 mA approx.
Net weight150 g approx.

MENU

Recently checked products

Recently checked product numbers