Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

AFP7CCRS1｜FP7 Add-on cassettes

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

AFP7CCRS1

Part Number

AFP7CCRS1

Product

FP7 Add-on Cassettes

Details

Communication Cassettes

Product Name

 FP7 Add-on cassettes

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberAFP7CCRS1
Product NumberAFP7CCRS1
Products NameFP7 Add-on Cassettes
Product detailsCommunication Cassettes

SPECIFICATIONS

ItemSpecifications
InterfaceRS-232C 1 channel
Transmission distanceMax. 15 m 49.213 ft
(Note) Cable length should be no longer than 3 m 9.843 ft if communicating at a rate of 38.4 kbits/sec. or hi1gher. If you are using RS-232C wiring, shielded cable should be used to improve noise immunity.
Transmission speed300,600,1200,2400,4800,9600,19200,38400,57600,115200, 230400 bits/sec.
Communication methodHalf-duplex system
Synchronous methodStart-stop synchronization system
Transmission formatStop bit: 1 bit / 2 bits
Parity: Invalid / Valid (Odd / Even)
Data length: 7 bits / 8 bits
Start code: with STX / without STX
End code: CR / CR + LF / None / ETX
Data transmission orderTransmit from bit 0 in character units.
Number of connected units-
(Note) If mixed C-NET adapters are used, up to 32 units can be connected, but transmission speed will be limited to a maximum of 19.2 kbits/sec.
(Note) The converter SI-35 manufactured by LINE EYE Co., Ltd. is recommendable for the RS-485 at the computer side. When you use the SI-35, please adjust time after FP7 series PLC receives a command until it returns a response by a program.

COMMON GENERAL SPECIFICATIONS

ItemSpecifications
Ambient temperature0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉
Ambient humidity10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)
Vibration resistance5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions
Shock resistance147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2)
Noise immunity1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)
Operating conditionFree from corrosive gasses and excessive dust

INDIVIDUAL GENERAL SPECIFICATIONS

ItemSpecifications
Rated voltage range-
Current consumption35 mA or less
(Note) Increased CPU unit current consumption
Net weight25 g approx. (with terminal block)

MENU

Recently checked products

Recently checked product numbers