Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

AFP7CCM2｜FP7 Add-on cassettes

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    AFP7CCM2

    Part Number

    AFP7CCM2

    Product

    FP7 Add-on Cassettes

    Details

    Communication Cassettes

    Product Name

    		 FP7 Add-on cassettes
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberAFP7CCM2
    Product NumberAFP7CCM2
    Products NameFP7 Add-on Cassettes
    Product detailsCommunication Cassettes
    The price of the productPlease contact our office

    SPECIFICATIONS

    ItemSpecifications
    InterfaceRS-422 / RS-485 2 channels
    Transmission distanceMax. 1,200 m 3,937 ft at RS-485 mode, Max. 400 m 1,312 ft at RS-422 mode
    (Note) If mixed C-NET adapters are used, up to 32 units can be connected, but transmission speed will be limited to a maximum of 19.2 kbits/sec.
    Transmission speed300,600,1200,2400,4800,9600,19200,38400,57600,115200, 230400 bits/sec.
    Communication methodHalf-duplex system
    Synchronous methodStart-stop synchronization system
    Transmission formatStop bit: 1 bit / 2 bits
    Parity: Invalid / Valid (Odd / Even)
    Data length: 7 bits / 8 bits
    Start code: with STX / without STX
    End code: CR / CR + LF / None / ETX
    Data transmission orderTransmit from bit 0 in character units.
    Number of connected unitsFor general-purpose communication: Max. 99 units
    For computer link: Max. 99 units
    For PLC link: Max. 16 units
    For MODBUS-RTU: Max. 99 units
    (Note) If mixed C-NET adapters are used, up to 32 units can be connected, but transmission speed will be limited to a maximum of 19.2 kbits/sec.
    (Note) The converter SI-35 manufactured by LINE EYE Co., Ltd. is recommendable for the RS-485 at the computer side. When you use the SI-35, please adjust time after FP7 series PLC receives a command until it returns a response by a program.
    (Note) 1: 1 for RS-422 interface.

    COMMON GENERAL SPECIFICATIONS

    ItemSpecifications
    Ambient temperature0 to +55 ℃ +32 to +131 ℉, Storage: -40 to +70 ℃ -40 to +158 ℉
    Ambient humidity10 to 95 % RH (at +25 ℃ +77 ℉, no condensation), Storage: 10 to 95 % RH (at +25 ℃ +77 ℉, no condensation)
    Vibration resistance5 to 8.4 Hz, single amplitude of 3.5 mm 0.138 in, 1 sweep/min. (IEC 61131-2) ; 8.4 to 150 Hz, constant acceleration of 9.8 m/s2, 1 sweep/min. (IEC 61131-2), 10 times each in X, Y, and Z directions
    Shock resistance147 m/s2 or more , 3 times each in X, Y, and Z directions (IEC61131-2)
    Noise immunity1,000 V [p-p] with pulse width 50 ns and 1 micro s (using a noise simulator)
    Operating conditionFree from corrosive gasses and excessive dust

    INDIVIDUAL GENERAL SPECIFICATIONS

    ItemSpecifications
    Rated voltage range-
    Current consumption90 mA or less
    (Note) Increased CPU unit current consumption
    Net weight25 g approx. (with terminal block)

    MENU

    Recently checked products

    Recently checked product numbers