Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

AFP0HCCS2｜FP0H communication cassettes

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

AFP0HCCS2

Part Number

AFP0HCCS2

Product Name

 FP0H communication cassettes

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberAFP0HCCS2
Product NumberAFP0HCCS2
InterfaceRS-232C 2 channels
Transmission distanceMax. 15 m 49.213 ft
Communication configuration1 : 1 communication
Communication speed1,200(Note), 2,400(Note), 4,800, 9,600, 19,200, 38,400, 57,600, 115,200, 230,400 bits/sec.
(Note): System register no. 415 cannot be used to set the baud rate to 1,200 bps. To set the baud rate to 1,200 bps, use the SYS1 instruction. If the baud rate of any of the COM ports is 2,400 bps or lower, F-ROM access will slow down.
Example) F12(ICRD) instruction, P13(ICWT) instruction, etc.
Communication methodHalf-duplex system
Synchronous methodStart-stop synchronization system
Transmission format : Data length7 bits / 8 bits
Transmission format : Paritynone / odd / even
Transmission format : Stop bit1 bit / 2 bits
Transmission format : Start codewith STX / without STX
Transmission format : End codeCR / CR + LF / none / ETX / Time (0 to 100 ms)
Data transmission orderTransmit from bit 0 in character units.
Number of stations-
Net weight10 g approx.
RemarkNotes:
1) The start and end codes can be used only for general-purpose serial communications.
2) The unit No. (station number) can be selected at system register.
3) Sufficient noise tolerance is provided but it is recommended that a user program be created for retransmission. (To improve the reliability of communications when a communication error occurs due to an excessive noise or when the target device cannot receive data temporarily.)
4) When connecting a commercially available device that has an RS-485 interface, please confirm operation using the actual device. In some cases, the number of station units, transmission distance and communication speed vary depending on the connected device.
5) When the transmission speed is 19,200 bits/s, you can set up to 99 stations and up to 1,200 m 3,937.008 ft transmission distance.

MENU

Recently checked products

Recently checked product numbers