Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

HG-S1110R｜Contact-Type Digital Displacement Sensor HG-S

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

HG-S1110R

Part Number

HG-S1110R

Product

Contact-Type Digital Displacement Sensor

Details

10 mm 0.394 in type
High precision Low measuring force type

Product Name

 Contact-Type Digital Displacement Sensor HG-S

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberHG-S1110R
Product NumberHG-S1110R
Products NameContact-Type Digital Displacement Sensor
Product details10 mm 0.394 in type
High precision Low measuring force type
Applicable regulationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Applicable controllerHG-SC101(-P), HG-SC111(-P), HG-SC112(-P), HG-SC113
Position detection methodOptical absolute linear encoder method
Measurement range10 mm 0.394 in
Stroke10.5 mm 0.413 in or more
Measuring force : Downward mount0.35 N or less
0.30 N
(Note 1): In the case of low measurement force type (HG-S1010R / HG-S1110R), measurements were obtained with products in standard configuration without rubber bellows.
(Note 2): Typical value near center of measurement.
Measuring force : Upward mount-
Measuring force : Side mount0.25 N or less
0.20 N
(Note 1): In the case of low measurement force type (HG-S1010R / HG-S1110R), measurements were obtained with products in standard configuration without rubber bellows.
(Note 2): Typical value near center of measurement.
Resolution0.1 μm 0.004 mil
Sampling rate1ms
Indication accuracy(P-P)Full range: 1.0 μm 0.039 mil or less
Narrow range: 0.5 μm 0.020 mil or less
(any 60 μm 2.362 mil)
Tip deviation amount35 μm 1.378 mil (typical)(Note):Linearity F.S. = 16 mA, and is linearity with respect to digitally measured values.
Hot swap functionIncorporated
Operation indicator2-color LED (Orange / Green)
Pollution degree2
Operating altitude2,000 m 6561.68 ft or less
(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.
Environmental resistance : Protection-
Environmental resistance : Ambient temperature-10 to +55 ℃ +14 to +131 ℉
(No condensation or icing),
Storage: -20 to +60 ℃ -4 to +140 ℉
Environmental resistance : Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Insulation resistance100 MΩ or more at 250 V DC
Environmental resistance : Vibration resistance10 to 500 Hz frequency, 3 mm 0.118 in double amplitude (maximum acceleration 196 m/s2) in X, Y and Z directions for two hours each
Environmental resistance : Shock resistance1,960 m/s2acceleration in X, Y and Z directions three times each
Grounding methodCapacitor grounding
MaterialBody: Zinc, Holder: Stainless steel, Spindle: Tool steel, Probe※: Brass (body) / Ceramic (ball), Rubber bellows: NBR (black)
※The probes (optional) are also available.
WeightNet weight: 80 g approx.
AccessoryLow measuring force type (HG-S1010R / HG-S1110R): Sensor head fastening wrench 1 pc., Mounting nut 1 pc., Rubber bellows 1 pc.
RemarkWhere measurement conditions have not been specified precisely, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature +20 ℃ +68 ℉, and a clean atmosphere where dust and liquids such as water and oil do not come in contact with the equipment.

MENU

Recently checked products

Recently checked product numbers