Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

HG-S1050｜Contact-Type Digital Displacement Sensor HG-S

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

HG-S1050

Part Number

HG-S1050

Product

Contact-Type Digital Displacement Sensor

Details

50 mm 1.969 in type
General purpose Standard type

Product Name

 Contact-Type Digital Displacement Sensor HG-S

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberHG-S1050
Product NumberHG-S1050
Products NameContact-Type Digital Displacement Sensor
Product details50 mm 1.969 in type
General purpose Standard type
Applicable regulationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Applicable controllerHG-SC101(-P), HG-SC111(-P), HG-SC112(-P), HG-SC113
(Note) : Always connect the 50 mm 1.969 in type (HG-S1050) to an HG-SC□ controller manufactured February 2019 or later.
Position detection methodOptical absolute linear encoder method
Measurement range50 mm 1.969 in
Stroke50.5 mm 1.988 in or more
Measuring force : Downward mount3.8 N or less (50 mm 1.969 in pressing position)
1.9 N (intermediate position)
(Note) : Typical value near center of measurement.
Measuring force : Upward mount3.2 N or less (50 mm 1.969 in pressing position)
1.4 N (intermediate position)
(Note) : Typical value near center of measurement.
Measuring force : Side mount3.4 N or less (50 mm 1.969 in pressing position)
1.7 N (intermediate position)
(Note) : Typical value near center of measurement.
Resolution0.5 μm 0.020 mil
Sampling rate1 ms
Indication accuracy(P-P)Full range: 3.5 μm 0.138 mil or less
Tip deviation amount40 μm 1.575 mil or less (typical)
(Note) : Value calculated from the clearance of the upper and lower plain bearings.
Hot swap functionIncorporated
Operation indicator2-color LED (Orange / Green)
Pollution degree2
Operating altitude2,000 m 6561.68 ft or less
(Note) : Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m.
Environmental resistance : ProtectionIP67 (IEC)
(Note) : Excludes damage and deterioration to rubber bellows due to external causes.
Environmental resistance : Ambient temperature-10 to +55 ℃ +14 to +131 ℉ (No condensation or icing allowed),
Storage: -20 to +60 ℃ -4 to +140 ℉
Environmental resistance : Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Insulation resistance100 MΩ or more at 250 V DC
Environmental resistance : Vibration resistance10 to 55 Hz frequency, 1.5 mm 0.059 in double amplitude in X, Y and Z directions for two hours each
Environmental resistance : Shock resistance980 m/s2 acceleration in X, Y and Z directions three times each
Grounding methodCapacitor grounding
MaterialBody: Aluminum alloy, Holder: Free-cutting steel, Spindle: Carbon tool steel,
Probe (Note): Brass (body) / Ceramic (ball), Rubber bellows: NBR (black)
(Note) : The probes (optional) are also available.
WeightMain unit weight: 180 g approx.
AccessorySensor head fastening wrench 1 pc., Mounting nut 1 pc.
RemarkWhere measurement conditions have not been specified precisely, the conditions used were as follows: standard type measurement probe (HG-SS10C), ambient temperature +20 ℃ +68 ℉, and a clean atmosphere where dust and liquids such as water and oil do not come in contact with the equipment.

MENU

Recently checked products

Recently checked product numbers