SC-HG1-485|Communication Unit for Digital Displacement Sensors SC-HG1
Download

*Photo may vary from actual product.
This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.
Product Number | SC-HG1-485 |
---|---|
Part Number | SC-HG1-485 |
Product | RS-485 Communication Unit for Digital Displacement Sensors |
Product Name | Communication Unit for Digital Displacement Sensors SC-HG1 |
*Specifications and design of the products are subject to change without notice for the product improvement.
Spec Detail
Specifications and design of the products are subject to change without notice for the product improvement.
Item | Specifications |
---|---|
Part Number | SC-HG1-485 |
Product Number | SC-HG1-485 |
Products Name | RS-485 Communication Unit for Digital Displacement Sensors |
Applicable regulations | CE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations) |
Compatible controllers | HG-SC□, HG-TC□ |
Supply voltage | 24 V DC ±10 %, Ripple (P-P) 10 % or less (Within specified power supply voltage range) (Note): Power is supplied from a connected master controller. |
Current consumption | 40 mA or less |
Communication method | Two-wire half duplex communication |
Synchronization method | Start-stop synchronization |
Communication protocol | MODBUS (RTU / ASCII) / MEWTOCOL-COM |
Communication speed | 1.2 kbps / 2.4 kbps / 4.8 kbps / 9.6 kbps / 19.2 kbps / 38.4 kbps / 57.6 kbps / 115.2 kbps |
Electrical characteristics | Complies with EIA RS-485 |
Number of connectable units : Host (RS-485) | 1 to 99 units when MODBUS (RTU/ASCII) is used, 1 to 64 units when MEWTOCOL-COM is used |
Number of connectable units : Sensors | Maximum of 15 controllers (one master, 14 slaves) per SC-HG1-485 unit |
Stop bit length | 1 bit / 2 bits |
Parity check | Even / Odd / None |
Data bit length | 8 bits (RTU) / 7 bits (ASCII) |
Degree of pollution | 2 |
Operating altitude | 2,000 m 6561.68 ft or less (Note): Do not use or store in an environment that has been pressurized to an air pressure higher than the atmospheric pressure at 0 m. |
Environmental resistance : Protection | IP40 (IEC) |
Environmental resistance : Ambient temperature | -10 to +45 ℃ 14 to +113 ℉ (No condensation or icing), Storage : -20 to +60 ℃ -4 to +140 ℉ |
Environmental resistance : Ambient humidity | 35 to 85 % RH, Storage : 35 to 85 % RH |
Voltage withstandability | 1,000 V AC for one min. between all supply terminals connected together and enclosure |
Insulation resistance | 20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure |
Environmental resistance : Vibration resistance | 10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude (10 to 58Hz), maximum acceleration 49 m/s2 (58 to 150 Hz) in X, Y and Z directions for two hours each |
Environmental resistance : Shock resistance | 98 m/s2 acceleration (10 G approx.) in X, Y and Z directions five times each |
Material | Unit case : Polycarbonate |
Total extension distance | Communication cable : 1,200 m 3,937.008 ft or less between SC-HG1-485 (terminal) and PLC |
Weight | Net weight : 75 g approx., Gross weight : 120 g approx. |
Remark | Where measurement conditions have not been specified precisely, the conditions used were ambient temperature +20 ℃ +68 ℉. |