Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

HL-C201F-MK｜Ultra High-speed・High-precision Laser Displacement Sensor HL-C2

Download

To Be Discontinued

Last time buy (JST)

Please note that the end date may be earlier due to various circumstances.

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

HL-C201F-MK

Part Number

HL-C201F-MK

Product

Ultra High-speed High-precision Laser Displacement Sensor

Details

Sensor head (Small size Super-high precision)

Product Name

 Ultra High-speed・High-precision Laser Displacement Sensor HL-C2
Substitute
Sub Prod No.
Sub Part No.
Remark

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberHL-C201F-MK
Product NumberHL-C201F-MK
Products NameUltra High-speed High-precision Laser Displacement Sensor
Product detailsSensor head (Small size Super-high precision)
The price of the productPlease contact our office
Applicable regulations and certificationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), China RoHS, FDA Regulations, Korea’s radio regulations (Radio Wave Act KC)
Setup modeSpecular reflective
Measurement center distance10 mm 0.394 in
Measurement rangeplus or minus 1 mm plus or minus 0.039 in
(Note) Measuring range at sampling periods of 20 micro s and 10 micro s is as follows.
20 micro s: +0.1 to +1.0 mm +0.004 to +0.039 in
10 micro s: +0.8 to +1.0 mm +0.032 to +0.039 in
Resolution [Average number of samples]0.04 micro m 0.0016 mil [256]
0.01 micro m 0.0004 mil [4,096]
(Note) The P-P value for the deviation in the digital measurement values at the measurement center range has been converted for the measurement center distance.
Linearityplus or minus 0.02 % F.S.
(Note) Indicates error with respect to the ideal linear values for digital displacement output when standard objects were measured by our company. It may vary depending on the types of objects being measured.
Temprerature characteristics0.01 % F.S./degrees
Light sourceRed semiconductor laser (Peak emission wavelength: 658 nm 0.026 mil)
Class 1 (IEC / JIS / FDA, Laser Notice No.56),
Max. output: 0.1 mW
Beam diameter20 x 700 micro m 0.787 x 27.559 mil approx.
(Note) This beam diameter is the size at the measurement center distance. These values were defined by using 1/e2 (13.5 %) of the center light intensity.
If there is a slight leakage of light outside the normal spot diameter and if the periphery surrounding the sensing point has a higher reflectivity than the sensing point itself, then the results may be affected.
Receiving elementLinear image sensor
Indicator : Laser emissionGreen LED (lights up during laser emission)
Indicator : Measuring rangeYellow LED
(lights up when near the measurement center distance, blinks when within the measuring range, and lights out when outside of the measuring range.)
Environmental resistance : ProtectionIP67 (IEC) (excluding the connector)
Environmental resistance : Ambient temperature0 to +45 degrees +32 to +113 degrees Fahrenheit (No dew condensation), Storage: -20 to +70 degrees -4 to +158 degrees Fahrenheit
Environmental resistance : Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Environmental resistance : Ambient illuminanceIncandescent light: 3,000 liter x at the light-receiving face
Environmental resistance : Vibration resistance10 to 55 Hz (period: 1 min.) frequency, 1.5 mm 0.059 in amplitude in X,Y and Z directions for two hours each
Environmental resistance : Shock resistance196 m/s2 acceleration (20 G approx.) in X,Y and Z directions for three times each
CableCabtyre cable, 0.5 m 1.640 ft long with connector
Cable extensionExtension up to total 30 m 98.425 ft is possible, with optional cable.
MaterialEnclosure: Die-cast aluminum
Case cover: Die-cast aluminum
Front cover: Glass
Weight250 g approx. (including cable)
AccessoryEnglish warning label: 1 set [The FDA regulations conforming type includes a set of both the IEC label (written in English) and JIS label (written in Japanese)].

MENU

Recently checked products

Recently checked product numbers