{lead}
{name}
  • {name}
  • 日本語
  • English (Global)
  • English (Asia Pacific)
  • 简体中文
  • 繁體中文
  • 한국어
▼
Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

ER-XC02｜Pulse AC Method Area Ionizer ER-X

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

ER-XC02

Part Number

ER-XC02

Product

Pulse AC Method Area Ionizer

Details

Controller

Product Name

 Pulse AC Method Area Ionizer ER-X

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberER-XC02
Product NumberER-XC02
Products NamePulse AC Method Area Ionizer
Product detailsController
The price of the productPlease contact our office
Applicable regulations and certificationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations), TÜV SÜD certification (USA, Canada)
Number of heads connectedMaximum 2 units
Supply voltage24 V DC ±10 %
Current consumption450 mA or less when connecting 1 heads, 800 mA or less when connecting 2 heads
IndicatorsDisplays status of Head 1 and 2
Indicators:Discharge (DSC)Green LED (lights up when discharging)
Indicators:Check (CHECK)Orange LED (lights up when dirt, wear, etc. of the discharge needle is detected)
Indicators:Error (ERROR)Red LED (lights up when abnormal discharge is detected)
Indictor:Level meterGreen LED (5 levels, lights up depending on amount of the charge or ion generation)
Output[ALARM, ERROR ,COM(Common)]PhotoMOS relay output
• Maximum load current: 100 mA
• Applied voltage: 30 V DC or less (between output-output common)
• Residual voltage: 1.5 V or less (at load current of 100 mA)
Output[ALARM, ERROR ,COM(Common)]:Output operationALARM:
ON when dirt or wear of the discharge needle is detected;
OFF when operation is normal.
ERROR:
OFF when abnormal discharge is detected;
ON when operation is normal.
Output[ALARM, ERROR ,COM(Common)]:Short-circuit protectionIncorporated (automatic reset type)
Discharge control input (DSC OFF)Discharge allowed: Open,
Discharge halt: 24 V or 0 V shorted
Ambient temperature0 to +50 °C +32 to +122 °F (No dew condensation),
Storage: -10 to +65 °C +14 to +149 °F
Ambient humidity35 to 65 % RH, Storage: 35 to 85 % RH
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MΩ, or more, with 250 V DC megger between all supply terminals connected together and enclosure
Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude or maximum acceleration 49 m/s2, in X, Y and Z directions for two hours each
Shock resistance100 m/s2 acceleration (10 G approx.) in X, Y and Z directions three times each
Enclosure earthingFloating
MaterialEnclosure: ABS
WeightNet weight : 130 g approx.
AccessoriesPower supply / I/O connector: 1 set (Housing 5557-10R, Terminal 5556TL [manufactured by Molex])
Ground wire (3.7 m 12.139 ft approx.): 1 pc.

MENU

Recently checked products

Recently checked product numbers