Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

SFD-WL3｜IO-Link Communication Unit

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

SFD-WL3

Part Number

SFD-WL3

Product

IO-Link communication unit for safety light curtain SF4D series

Product Name

 IO-Link Communication Unit

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberSFD-WL3
Product NumberSFD-WL3
Products NameIO-Link communication unit for safety light curtain SF4D series
Applicable regulationsCE Marking (EMC Directive, RoHS Directive), UKCA Marking (EMC Regulations, RoHS Regulations)
Communication method : Safety light curtain communication sideRS-485 bidirectional communication (dedicated protocol)
Communication method : IO-Link communication sideIO-Link specifications: Ver. 1.1
Baud rate: COM3 (230.4 kbps)
Data length: 18 bytes, process data (PD)
Minimum cycle time: 1.5 ms
Supply voltage : Safety light curtain communication side24V DC +20-30 % Ripple P-P 10 % or less
Supply voltage : IO-Link communication side24V DC +20-25 % Ripple P-P 10 % or less
Current consumption : Safety light curtain communication side15 mA or less
Current consumption : IO-Link communication side30 mA or less
Functions• IO-Link communication function
• Safety light curtain setting data copy function (Note)

Note :
• The internal memory (nonvolatile) of this product has a service life. Settings cannot be configured more than 100,000 times.
• This product cannot be used to directly enter settings from the IO-Link master unit to a safety light curtain using IO-Link communication.
• The safety light curtain setting data copy function is designed only for use in maintenance / replace of safety light curtains.Use the copy function only for loading the setting data of the previous safety light curtain to a new unit. Loading the data to a device other than a newly installed safety light curtain may result in improper device operation.
• This function cannot be used unless the product is connected with the IO-Link master unit and IO-Link communication is used.
Number of connectable units : This product1 unit
Number of connectable units : Safety light curtains in series connectionUp to 5 units (total number of beam channels 256 or less)
Pollution degree3
Excess voltage categoryI
Operating altitude2,000 m 6561.68 ft or less
Note : Do not use or store in an environment pressurized to atmospheric pressure or higher at an altitude of 0 m.
Degree of protectionIP64
Ambient temperature-10 to +55℃ 14 to 131℉(No dew condensation or icing allowed),
Storage: -25 to +60℃ -13 to 140℉
Ambient humidity30 to 85% RH, Storage: 30 to 95% RH
Environmental resistance : Dielectric strength voltage1,000 V AC for one minute, between all supply terminals connected together and enclosure
Environmental resistance : Insulation resistance20 MΩ or more, with 500 V DC megger, between all supply terminals connected together and enclosure
Environmental resistance : Vibration resistance10 to 55 Hz, 0.75 mm 0.030 in double amplitude in X, Y, and Z directions for two hours each
Malfunction resistance 10 to 55 Hz, 0.75 mm 0.030 in double amplitude in X, Y, and Z directions twenty times each
Environmental resistance : Shock resistance300 m/s2 acceleration (30 G approx.) in X, Y, and Z directions three times each
Malfunction resistance 100 m/s2 acceleration (10 G approx.) in X, Y, and Z directions 1,000 times each
MaterialMain unit case: PA66 (with glass)
Base plate: SPCC + Plating
Product model nameplate: Polyester
External connection connector: Brass + Plating
Connection : Safety light curtain communication side8-core cable for safety light curtain (optional)
Connection method : IO-Link communication side4-core cable with M12 connector (commercially available product)
Weight270 g approx.
Remark Use the safety light curtain monitoring information obtained via IO-Link only for diagnostic purposes. Do not use it for safety control purposes.

MENU

Recently checked products

Recently checked product numbers