{lead}
{name}
  • {name}
  • 日本語
  • English (Global)
  • English (Asia Pacific)
  • 简体中文
  • 繁體中文
  • 한국어
▼
Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

LA-A1｜LED Collimated Beam Sensor LA-300

Download

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

Product Number

LA-A1

Part Number

LA-A1

Product

LED Collimated Beam Sensor

Details

Amplifier (NPN output type)

Product Name

 LED Collimated Beam Sensor LA-300

Contact Us

*Specifications and design of the products are subject to change without notice for the product improvement.

Spec Detail

Specifications and design of the products are subject to change without notice for the product improvement.
ItemSpecifications
Part NumberLA-A1
Product NumberLA-A1
Products NameLED Collimated Beam Sensor
Product detailsAmplifier (NPN output type)
The price of the productPlease contact our office
TypeNPN output type
Applicable regulationsCE Marking (EMC Directive, RoHS Directive)
Applicable sensor headLA-305
Supply voltage12 to 24 V DC plus or minus 10 % Ripple P-P 10 % or less
Current consumption120 mA or less (including sensor heads)
Comparative outputs (HIGH, LOW)NPN open-collector transistor
-Maximum sink current: 100 mA
-Applied voltage: 30 V DC or less
(between comparative output and 0 V)
-Residual voltage: 1.5 V or less (at 100 mA sink current), 0.5 V or less (at 16 mA sink current)
Comparative outputs (HIGH, LOW) : Utilization categoryDC-12 or DC-13
Comparative outputs (HIGH, LOW) : Response time0.5 ms or less
Comparative outputs (HIGH, LOW) : Output operationHIGH output: ON when the received beam level is equal to or lower than HIGH (Over-dark) level
LOW output: ON when the received beam level is equal to or higher than LOW (Under-dark) level
Comparative outputs (HIGH, LOW) : Short-circuit protectionIncorporated
Analog outputAnalog voltage
Output voltage: 1 V (Darkest) to 5 V (Lightest)
Output impedance: 75 Ohm
Analog output : Slew rate8 V/ms or more
Analog output : Temperature characteristics0.05 % F.S./℃ or less
External synchronizationIncorporated
(Either gate trigger or edge trigger is selectable)
Indicators : PowerGreen LED (lights up when the power is ON)
Indicators : Stable incident beamThree green LEDs
(light up in three stages in proportion to the amount of beam received)
Indicators : OperationTwo orange LEDs
(light up when High and Low comparative outputs are ON, respectively)
Indicators : External synchronizationGreen LED
(lights up when the comparative outputs are effective)
Adjusters : Span15-turn adjuster sets the span for the analog output voltage
Adjusters : Shift15-turn adjuster sets the offset for the analog output voltage
Adjusters : HIGH (Over-dark) level15-turn adjuster sets the HIGH output threshold level
(Over-dark level)
Adjusters : LOW (Under-dark) level15-turn adjuster sets the LOW output threshold level
(Under-dark level)
Environmental resistance : Ambient temperature0 to +50 ℃ +32 to +122℉ (No dew condensation),
Storage: -20 to +70℃ -4 to +158℉
Environmental resistance : Ambient humidity35 to 85 % RH, Storage: 35 to 85 % RH
Voltage withstandability1,000 V AC for one min. between all supply terminals connected together and enclosure
Insulation resistance20 MΩ , or more, with 250 V DC megger between all supply terminals connected together and enclosure
Environmental resistance : Vibration resistance10 to 150 Hz frequency, 0.75 mm 0.030 in double amplitude in X, Y and Z directions for two hours each
Environmental resistance : Shock resistance500 m/s2 acceleration (50 G approx.) in X, Y and Z directions three times each
MaterialEnclosure: Heat-resistant ABS
Terminal cover: Heat-resistant ABS
Front cover: Polycarbonate
Cable0.22 mm2 (shield wire: 0.15 mm2) 7-core composite cabtyre cable, 2 m 6.562 ft long
WeightNet weight: 200 g approx.
AccessoryAdjusting screwdriver: 1 pc.

MENU

Recently checked products

Recently checked product numbers