Panasonic Industry / Automation Controls
MENU
Panasonic Industry / Automation Controls

AKL1000｜Data Logger Light (DLL)(Discontinued)

Download

Discontinued

Last time buy (JST)

*Photo may vary from actual product.

This product has been confirmed that it does not contain the 6 substances specified in EU RoHS Directive 2011/65/EU and the 4 substances specified in 2015/863/EU.

    Product Number

    AKL1000

    Part Number

    AKL1000

    Product

    Data Logger Light

    Product Name

    		 Data Logger Light (DLL)(Discontinued)
    Substitute
    Sub Prod No.
    Sub Part No.
    Remark

    Spec Detail

    ItemSpecifications
    Part NumberAKL1000
    Product NumberAKL1000
    Products NameData Logger Light
    The price of the productPlease contact our office

    Main unit

    ItemSpecifications
    Rated operating voltage100 to 240 V AC
    Allowable operating voltage range85 to 264 V AC (85 to 110 % of rated operating voltage)
    Rated frequency50 / 60 Hz
    Allowable momentary power-off timeMax. 10 ms
    Rated output voltage24 V DC
    Output voltage range21.6 V to 26.4 V DC
    Rated output current0.2 A
    (Note) If a current load over the specified level is continuously applied, the unit may break down. When a short circuit is detected, the whole power supply of Data Logger Light will be shut down.
    Ambient temperature-10 to +55 ℃ +14 to +131 ℉
    Storage temperature-25 to +70 ℃ -13 to +158 ℉
    Current consumptionMax. 230 mA (at 100 V AC)
    WeightApprox. 200 g (without battery)

    Performance specifications

    ItemSpecifications
    Data Accumulation:Logged Data:DescriptionInstantaneous, difference, average, minimum, and maximum values
    Data Accumulation:Logged Data:Data format(Valid for the register system)16-bit integers (signed / unsigned), 32-bit integers (signed / unsigned), HEX (4-digit / 8-digit), Real number
    Data Accumulation:Logged Data:Number of registrable files16
    Data Accumulation:Logged Data:Number of registrable devices300 points / 1 file
    (Note) The maximum total number of points for registrable devices is always 300, for either 1 file or 16 files.
    Data Accumulation:Data stored:Stored toInternal memory (SRAM): 1 MB
    SD / SDHC memory cards: 2 to 32 GB
    (Note) The internal memory can store data using the backup battery. Please note that data stored in the internal memory may be lost when the battery has been depleted.
    Data Accumulation:Data stored:File systemVFAT / FAT / FAT32
    Data Accumulation:Data stored:Saving formatCSV file type
    Data Accumulation:Data stored:Number of storable files100
    Data Accumulation:Trigger:Trigger type- Constant cycle (user-selectable from 1 second to 24 hours)
    - Contact status (rising edge, falling edge, both edges, accumulation ON time, number of accumulation open/close operations, ON status, and OFF status)
    - Specified time (every minute, every hour, every day, every week, every month, every year, and specified time)
    - Register (=, >, <, Not =)
    - Trigger combinations (AND, OR)
    Data Accumulation:Trigger:Number of registrable128
    E-mail sending function:Transmission networkLAN
    E-mail sending function:E-mail contentTitle: Within 16 one-byte or 8 two-byte characters
    Body: Within 256 one-byte or 128 two-byte characters
    E-mail sending function:Number of registrable64 (with no files attached)
    Network function:Communication protocolTCP / IP, UDP / IP
    Network function:Application protocolSMTP (Capable of POP / APOP authentication), FTP (client / server), SNTP, DHCP, DNS

    Communication specifications

    ItemSpecifications
    EthernetInterface: IEEE802.3U, 10BASE-T / 100BASE-TX
    Connector type: RJ45
    Transmission specifications (Transmission speed): 10 Mbps / 100 Mbps
    Transmission specifications (Transmission method): Base band
    Transmission specifications (Max. segment length): 100m 328ft
    Communication cable: UTP (category 5)
    Functions: Auto-negotiation function, MDI / MDI-X auto-crossover function
    RS232CInterface: RS-232C (Not isolated from the internal circuit)
    Communication form: 1: 1 communication
    Number of connected units: 1 unit
    Communication method: Half-duplex
    Synchronous system: Synchronous communication method
    Transmission distance: 15m 49 ft
    Transmission speed: 4,800 / 9,600 / 19,200 / 38,400 / 57,600 / 115,200 bps
    Transmission format (Stop bit): 1-bits / 2-bits
    Transmission format (Parity): Odd number / Even number / Not available
    Transmission format (Data length): 7-bits / 8-bits(Note)With MODBUS (RTU) protocol, it works only with 8-bit.
    Protocol: MEWTOCOL / Modbus RTU
    RS485Interface: RS-485 (Isolated from the internal circuit)
    Communication form: 1: N communication
    Number of connected units: 99 units (Note 1)(Note 2)
    Communication method: Half-duplex
    Synchronous system: Synchronous communication method
    Transmission distance: Max. 1200 m 3,937 ft (Note 3)
    Transmission speed: 4,800 / 9,600 / 19,200 / 38,400 / 57,600 / 115,200 bps
    Transmission format (Stop bit): 1-bits / 2-bits
    Transmission format (Parity): Odd number / Even number / Not available
    Transmission format (Data length): 7-bits / 8-bits (Note 4)
    Protocol: MEWTOCOL / Modbus RTU
    (Note 1) When using a PC as a slave station, you are recommended to use SI-35 or SI-35USB of LlNEEYE Co., Ltd. as an RS485 interface.
    (Note 2) When using SI-35,SI-35USB, our Eco-POWER METER or our PLC (which can be connected up to 99 units), up to 99 units can be connected. In case using this system with the other devices, up to 31 units can be connected.
    (Note 3) The transmission distance is limited by the transmission speed and the number of units connected. When the speed is 38,400 bps or lower, the maximum transmission distance is 1,200 m 3,937 ft, and the number of units is 99.
    (Note 4) With Modbus RTU protocol, it works only with 8-bit.

    External memory specifications(SD memory card slot)

    ItemSpecifications
    Support mediaSD / SDHC memory card (Note) Panasonic business-use SD memory card is recommended.
    Supported format standardsSD / SDHC standard conformance
    (Note) UHS standard SDHC memory cards are not supported. Log data may not be written to the SD memory card if an SD memory card without operational confirmation is used.
    Memory capacity2 to 32 GB
    Speed classClass 2 to Class 10

    MENU

    Recently checked products

    Recently checked product numbers